Multilevel cascaded H-bridge converters are promising candidates for large-scale photovoltaic power plants. They allow direct connection to medium-voltage distribution networks without the presence of bulky line frequency power transformers. Owing to the stochastically variable nature of irradiance level, ambient temperature, and other factors, power levels in the three phases are expected to be unequal. The power imbalance condition creates unexpected problems with this topology, which was initially designed to operate under balanced power conditions. To deal with this issue, the paper proposes three novel zero-sequence injection methods as an expansion to the conventional zero-sequence injection method. Results obtained from simulations and a 430-V 8-kW three-phase seven-level cascaded H-bridge prototype are presented to verify the effectiveness and feasibility of the proposed methods.
27 February 2015 in IEEE Transactions on Power Electronics
Multilevel-cascaded H-bridge converters are promising candidates for next generation photovoltaic power converters. They feature reduced switching losses and higher conversion efficiency with modular structure; characteristics vital for large-scale photovoltaic power plants. However, the stochastically-variable nature of irradiance levels and ambient temperatures affects the normal operation of this topology, because power levels in the three phases can be unequal. The existing zero sequence injection method can deal with the power imbalance problem, but it is limited in its application. The paper proposes a zero sequence injection method to optimize the converter power balance, extending the converter operation with severe power imbalance. Based on the proposed optimal method, a simplified optimal zero sequence injection method requiring less calculation effort is derived and compared with the optimal method. Simulation and experimental results validate the effectiveness and feasibility of the proposed methods.