As one of the most successful applications in optical fiber sensing, interferometric fiber optic gyroscope (IFOG) has become the ideal choice for inertial navigation systems, and has been widely used in the fields of aviation, aerospace, navigation, and land. Exploring the theoretical noise limit and improving the practical precision are the objectives of FOG investigations, and the advanced photonic crystal fibers offer powerful approaches and potential to achieve these goals. In this review, the progress of photonic crystal fibers in FOGs research and applications for angular velocity measurement have been reviewed, together with the advanced technologies for improving the FOG's precision and reducing its volume.
Chip-scale interferometric fiber optic gyroscope (IFOG) has caught growing attention for its huge application potential in the low-cost consumer electronics market. In this paper, a novel three-axis IFOG is proposed and assembled with an integrated coupler chip (ICC) fabricated on the silica platform. The ICC realizes bidirectionally multichannel optical interconnection without waveguide crossings. The test results indicate the weak wavelength dependence and comparatively low insertion loss at 0.85μm of the ICC. With ~900m polarization-maintaining fiber coils, the three-axis IFOG exhibits a long-term stability of <0.16 °/h, which satisfies the requirements of the tactical grade systems. The novel IFOG scheme with ICC paves the way for the research on chip-scale multi-axis IFOGs.
22 June 2021 in IEEE Transactions on Instrumentation and Measurement
Micrometeoroid and orbital debris (MMOD) can cause serious impact damage to long-term on-orbit spacecraft. MMOD impact detection and location are essential to improve the safety and reliability of the on-orbit spacecraft. In this article, a combined artificial neural network (ANN) and Mahalanobis distance method for MMOD impact detection and location based on fiber Bragg grating (FBG) sensor network is proposed. The inputs of the proposed ANN are the Mahalanobis distances determined by the wavelength changes of the FBG sensors at impact points and reference points. A finite element model is developed to explore the relationship between the Mahalanobis distance and the actual distance, which proved to be nonlinear based on the finite element simulation results of MMOD impacts. Four FBG sensors were installed on the back of the test board and sampled at a frequency of 100 Hz using a four-channel FBG demodulator. A total of 360 impact experiments were carried out on this experiment system. The average location error of the proposed method is 0.89 cm, which is 39% and 31% lower compared with the Mahalanobis distance discriminant analysis method and the ANN method, respectively. The combined ANN and Mahalanobis distance method reduces the location errors and has higher accuracy of position prediction.
21 October 2022 in Journal of Lightwave Technology
Radiation-induced magneto-optic fluctuations (RI-MOF) is a kind of environmental compounding effect of fiber optic gyroscope (FOG) in space application. Here, we suggested a model of RI-MOF and experimentally tested it in irradiated polarization-maintaining fibers (PMFs) and polarization-maintaining photonic crystal fibers (PM-PCFs). The test results reveal that the main sources of RI-MOF are the radiation-induced change of the Verdet constant and the modal birefringence. In a spacecraft with good thermal control conditions, an evaluation method based on the RI-MOF model can be summarized and implemented to suppress the environmental disturbance on the performance of FOG.
15 July 2014 in Science China Technological Sciences
The modulation asymmetry of a multifunction integrated optic circuit (MIOC) indicates the difference in the phase response to modulation electric fields with the same magnitude but different directions, and is partly caused by the vertical component of the modulation signal. This introduces a nonlinear phase error that is difficult to compensate in fiber optic gyroscopes (FOGs), which needs to be suppressed. In this paper, a sinking-electrode MIOC design to suppress the modulation asymmetry is proposed and verified through numerical simulations. Optimal parameters of the gap, height, side-wall angle, and center position error of the sinking electrodes are obtained on the basis of the simulation results. With the proposed method, the modulation asymmetry of MIOC can be reduced from 5×10-4 rad to 1×10-6 rad, thus facilitating the development of high-performance FOGs. Furthermore, compared with the traditional electrode design, the sinking-electrode design can increase the tolerance for the manufacturing process, and the design configuration can be obtained through the general process method.