23 March 2023 in Journal of Lightwave Technology
As one of the most successful applications in optical fiber sensing, interferometric fiber optic gyroscope (IFOG) has become the ideal choice for inertial navigation systems, and has been widely used in the fields of aviation, aerospace, navigation, and land. Exploring the theoretical noise limit and improving the practical precision are the objectives of FOG investigations, and the advanced photonic crystal fibers offer powerful approaches and potential to achieve these goals. In this review, the progress of photonic crystal fibers in FOGs research and applications for angular velocity measurement have been reviewed, together with the advanced technologies for improving the FOG's precision and reducing its volume.
27 March 2023 in IEEE Sensors Journal
Chip-scale interferometric fiber optic gyroscope (IFOG) has caught growing attention for its huge application potential in the low-cost consumer electronics market. In this paper, a novel three-axis IFOG is proposed and assembled with an integrated coupler chip (ICC) fabricated on the silica platform. The ICC realizes bidirectionally multichannel optical interconnection without waveguide crossings. The test results indicate the weak wavelength dependence and comparatively low insertion loss at 0.85μm of the ICC. With ~900m polarization-maintaining fiber coils, the three-axis IFOG exhibits a long-term stability of <0.16 °/h, which satisfies the requirements of the tactical grade systems. The novel IFOG scheme with ICC paves the way for the research on chip-scale multi-axis IFOGs.
25 January 2021 in IEEE Transactions on Instrumentation and Measurement
Respecting the requirements of lightweight, small size, low power consumption and especially low cost, commercial off-the-shelf (COTS) analog-to-digital converters (ADCs) are gradually being used to replace specifically designed aerospace -grade ones in space-borne miniature interferometric fiber-optic gyroscopes (IFOGs). However, the total ionizing dose (TID) effect of $\gamma $ -ray radiation in the space environment may cause the damage of COTS ADCs, and lead to performance degradation and even the failure. In order to measure the safety of COTS ADCs in IFOGs under the TID effect, the radiation-induced degradation model and the corresponding reliability model are proposed in this work. First of all, the relationship between the degradation of COTS ADCs and the IFOG's angular random walk (ARW) is deduced. Then, a radiation accelerated test is designed and performed, with a real-time, dynamic data acquisition method based on the first-input-first-output (FIFO) memories to determine the degradation of COTS ADCs. Finally, a degradation path model is established based on the degradation data, and the reliability of COTS ADCs used for space-borne IFOGs is further obtained by using the Monte Carlo method. An engineering application is introduced to show the effectiveness of the proposed model, and the results show that the reliability of the experimental COTS ADCs makes them usable for the space-borne miniature IFOGs in low-earth orbit (LEO) and geostationary earth orbit (GEO) space missions.
12 January 2023 in IEEE Sensors Journal
The FBG-based embedded optical fiber 3D shape sensor (FBG-EOFSS) composed of several different materials finds potential applications in various industrial and medical applications. The strain loss during the strain transfer affects the change of the fiber Bragg grating (FBG) sensor’s wavelength which in turn deteriorate the position accuracy. In this paper, firstly, we analyzed the strain transfer in FBG-EOFSS and derived the optical-mechanical transformation equation. Then a strain transfer model combining mechanics, materials, and optics is developed based on the finite element analysis (FEA) method. The FEA simulation results show that the strain transfer rate decreases by 27.7%/mm with the increase of the adhesive thickness under FBG. The optimal average strain transfer rate is about 0.97 when the elastic modulus of the adhesive is in the range of 10 9 Pa to 10 14 Pa. Moreover, the effect of the strain transfer on the position accuracy is analyzed. The relative position error of 3D shape reconstruction increases by 8.4% with the strain transfer rate decreasing by 10%. Finally, an experimental system composed of the clamp, the displacement stage, and the FBG demodulator is developed. The strain sensitivity coefficients of bare FBGs and FBG sensors were tested quantitatively. The corresponding average strain transfer rate was calculated by the strain sensitivity coefficients. The results can potentially conduce to the design of 3D shape sensors and improve the positioning accuracy.
1 November 2020 in Chinese Physics Letters
We demonstrated the generation and characterization of 9.7 fs, 180 μJ pulses centered at 385 nm via the frequency doubling of few-cycle near-infrared pulses. Both moderate conversion efficiency (9.5%) and broad phase matching bandwidth (20 nm) were achieved by shaping the spectra of the fundamental pulses. The strong intensity dependence of second-order harmonic generation and well controlled material dispersion ensured the inexistence of satellite pulses, which was confirmed by the self-diffraction frequency resolved optical gating measurement.
29 November 2023 in IEEE Sensors Journal
Sensing the deformation of the satellite solar panel is significant to the satellite health monitoring in the harsh space environment. The fiber Bragg grating (FBG) sensor with the advantages of small size, easy to connect in series, and high electromagnetic immunity is one of the ideal sensors. In this article, an FBG sensor placement method to achieve long fatigue life and high measurement accuracy is proposed. A finite element analysis (FEA) model of the satellite solar panel is developed and the FEA results of the strain field, the stress field, and the displacement field are used in the proposed method. By virtue of the multi objective simulated annealing (MOSA) algorithm, all optimal placements of FBG sensors on the Pareto front can be obtained. The point P 1 (0.0319, 31.7744) and the point P 2 (0.0166, 18.4765) at the top and the bottom of the Pareto front respectively have the optimal average number of fatigue cycles and the optimal measurement accuracy. The point P 3 (0.0306, 20.8603) on the Pareto front has relatively excellent performance in both the fatigue life and the measurement accuracy. A deformation sensing experiment system with a satellite solar panel and 9 FBG sensors was established. 8 FBG sensors are used to measure the strain and 1 FBG sensor is used to compensate the temperature-induced error. The trend of experimental results coincides with the simulation results. Thus, the proposed method provides an effective approach to achieve high-reliable and high-accuracy FBG sensors placement.