A novel cellular mechanical metamaterial called Fish Cells that exhibits zero Poisson’s ratio in both orthogonal in-plane directions is proposed. Homogenization study on the Fish Cells tessellation is conducted and substantially zero Poisson’s ratio behavior in a homogenized tessellation is shown by numerical analysis. Experimental investigations are performed to validate the zero Poisson’s ratio feature of the metamaterial and obtain force–displacement response of the metamaterial in elastic and plastic zone. A detailed discussion about the effect of the numerical model approach and joints on the structural response of the metamaterial is presented. Morphing skin is a potential application for Fish Cells metamaterial because of the integration benefits of zero Poisson’s ratio design. The structural integrity of the Fish Cells is investigated by studying the stiffness augmentation under tension and in presence of constraints on transverse edges. Finally, geometrical enhancements for improved integrity of the Fish Cells are presented that result in substantially zero stiffness augmentation required for morphing skins.
27 July 2020 in Journal of Intelligent Material Systems and Structures
Fish Cells as a new metamaterial with zero Poisson’s ratio in two planar directions is introduced with application in morphing aircraft skin. In order to tailor the design of this metamaterial for arbitrary loadings, equivalent elastic properties of the Fish Cells metamaterial are derived and analyzed using analytical and numerical methods. The admissible range of geometric parameters is presented and variation of elastic properties with parameters is studied. The effective elastic modulus of the metamaterial is derived analytically and verified with finite element models. The in-plane and transverse shear modulus of the metamaterial are evaluated using finite element analysis where accurate periodic boundary conditions for in-plane shear loading are investigated. The lower and upper bounds of the transverse shear modulus are derived based on strain and complementary energy relations which are verified with finite element results. As zero Poisson’s ratio behavior of the Fish Cells topology is proved, derivative geometries from this topology with zero Poisson’s ratio behavior are also presented.
Mechanical metamaterials are advanced engineering materials that exhibit unusual properties that cannot be found in nature. The elastic properties (i.e., elastic modulus and Poisson's ratio) of mechanical metamaterials can be tuned by changing the geometry of their fundamental unit cells. This allows for the design of metamaterial lattices with targeted quasi-static properties. However, it is not clear how these freedoms contribute to the dynamic properties of mechanical metamaterials. We, therefore, used experimental modal analysis, numerical simulations, and analytical models to study the dynamic response of meta-structures with different values of the Poisson's ratio. We show that Poisson's ratio strongly affects the damping properties of the considered mechanical metamaterials. In particular, we found an inverse relationship between the damping ratio and the absolute value of the Poisson's ratio of the meta-structures. Our results suggest that architected meta-structures similar to those studied could be tailor-made to improve the dissipative performance of mechanical systems. Geometrical design could play an important role in this regard by providing the possibility to tune the various types of quasi-static and dynamic properties of such mechanical metamaterials.
22 July 2022 in IEEE Robotics and Automation Letters
Widespread adoption of soft robotic technologies is held back by the limitations of existing soft robotic actuators. One cause of the limited performance of soft actuators is their uni-polar stroke, which means only part of the work-cycle is powered. In this work, we introduce RoboHeart, a bi-directional compliant smart actuator. RoboHeart consists of two spring-steel strips covered with PVC insulation, pre-bent into a heart shape and is driven by dielectrophoretic zipping. Here, we perform isotonic and isometric characterisation of RoboHeart performance, demonstrating work output of 17 mJ (expansion) and 18 mJ (contraction) and power of 1.5 mW (expansion) and 2 mW (contraction). We then confirm the practical application of RoboHeart by demonstrating a 10-RoboHeart ring configuration capable of gripping a range of objects as they are lifted. We also demonstrate bidirectional control of actuation using three separate control channels. We believe that RoboHeart represents a step towards high-performance soft actuators and technologies.
Biointerfacing techniques for connecting implants to living tissues are advancing, but matching stiffness at hard-soft interfaces, such as between tendon and bone, remains challenging. This is critical for improving biomechanical tissue models, repairing trauma, and integrating soft robotic technologies like artificial muscles. Here we introduce a 3D-printable, biocompatible composite combining a hydrogel (gelatin methacryloyl) with a hybrid resin of diacrylates and epoxide. By adjusting the mixture ratio, the material’s elastic modulus spans a wide physiological range, from 15 kPa (soft brain tissue) to 1.4 GPa (similar to bone), covering six orders of magnitude. Mechanical tests confirm this tunability, and cytocompatibility tests show high cell viability, proliferation, and metabolic activity. The approach offers a path to creating efficient gradient stiffness interfaces, potentially leading to more accurate tissue phantoms and devices for human body repair and augmentation, especially where continuous hard-to-soft transitions are essential.
Novel rolling bistable passive and active elastic strips are integrated in mechanical metamaterials to overcome limitations of conventional negative stiffness mechanisms, delivering large strain capacity, high force density and long fatigue life.