Poultry slaughterhouses are generally large consumers of fresh water, which is exhausted as wastewater characterized by a high concentration of biological oxygen demand (BOD), chemical oxygen demand COD, and fats, oil, and grease (FOG). Cost-effective methods are required for the treatment of poultry slaughterhouse wastewater, with the aim of attaining a high quality effluent that can be reused in industrial processes to promote sustainability. As compared to conventional treatment methods, electrocoagulation is an efficient and low-cost system. Electrocoagulation is environmentally friendly, treating wastewater without the need of chemicals, thus limiting secondary pollution. The metal anodes initiate electrochemical reactions for coagulation and flocculation. Its distinct advantages include compact installation and simple operation. This paper offers a comprehensive review of recent literature that has been dedicated to utilizing electrocoagulation for poultry slaughterhouse wastewater treatment. This paper also examines aspects such as theory, potential applications, current applications, as well as economical assessment of the technique.
The feasibility of a biological (EcoflushTM) and/or electrocoagulation (EC) treatment system in removing chemical oxygen demand (COD) and fats, oils, and grease (FOG) from poultry slaughterhouse wastewater (PSW) were studied. The response surface methodology (RSM) was used to identify the optimum operating condition for EC and its integration with EcoflushTM as a pre-treatment for the removal of lipids. The optimum operating conditions were obtained at a pH of 3.05, a current density of 66.9 A/m2, 74-min of treatment time, and without Ecoflush™. These conditions produced a high-quality clarified effluent after 92.4% COD reduction and 99% FOG reduction. The treatment with EcoflushTM only resulted in 85–99% FOG reduction, 20–50% COD reduction, and odourless effluent. However, the combination of both processes (EcoflushTM and EC) did not yield a significant difference (F test, p > 0.05) when compared to the performance of EC alone. Despite the low removal percentages of nitrogen and phosphorus, the present study proved that EC is an effective method for the removal of COD and FOG, rendering an effluent that meets the permissible discharge standards for the City of Cape Town. The novel Ecoflush™ also proved to be very efficient in the removal of FOG from PSW.
Tanneries generate copious amounts of potentially toxic sludge and effluent from the processing of skins and hides to leather. The effluent requires remediation before discharge to protect the receiving environment. A range of physicochemical methods are used for pre- and post-treatment, but biological secondary remediation remains the most popular choice for the reduction of the organic and macronutrient fraction of tannery effluent. This review provides an update and critical discussion of biological systems used to remediate tannery effluent. While the conventional activated sludge process and similar technologies are widely used by tanneries, they have inherent problems related to poor sludge settling, low removal efficiencies, and high energy requirements. Treatment wetlands are recommended for the passive polishing step of beamhouse effluent. Hybrid systems that incorporate anoxic and/or anaerobic zones with sludge and/or effluent recycling have been shown to be effective for the removal of organics and nitrogenous species at laboratory scale, and some have been piloted. Novel systems have also been proposed for the removal and recovery of elemental sulfur and/or energy and/or process water in support of a circular economy. Full-scale studies showing successful long-term operation of such systems are now required to convince tanneries to modernize and invest in new infrastructure.
Accurate biomass quantification is important for evaluating growth kinetics and performance of microalgal and microalgal–bacterial wastewater treatment systems. However, small-scale studies frequently encounter methodological limitations due to low biomass concentrations, limited sampling volumes, and/or interference from non-biotic solids in complex wastewaters. This work adopts a two-fold approach: (i) a concise review of current biomass quantification methods for bench-scale systems, and (ii) an experimental evaluation of a gravimetric protocol for complex wastewaters. The review discusses commonly applied techniques, highlights their strengths and weaknesses, and identifies research gaps in data comparability and reproducibility. The laboratory investigations evaluated the effects of key factors, namely culture volume (250 mL to 1 L), test aliquots (2.5 mL to 10 mL), and the absolute weight of total suspended solids (3.43 g to 14.5 g) on total suspended solids measurements. Aliquots containing 8–10 mg absolute total suspended solids per aliquot was present. In complex wastewater matrices, approximately 18% of total suspended solids consisted of non-volatile solids, demonstrating that the method can systematically over-estimate true dry cell weight in microalgal–bacterial systems. The findings emphasized the need for procedural standardization. Finally, a practical gravimetric protocol is proposed for both axenic and consortium-based small-scale studies dealing with complex wastewater, providing an evidence-based roadmap for obtaining more reliable biomass estimations.
Effluent from anaerobic digestion of tannery effluent contains high concentrations of ammonia and residual organics and requires tertiary remediation before discharge. The aim of this study was to gain insight into microalgal-bacterial (MAB) systems for nitrogen removal from secondary tannery effluent by synergistic nitrification-denitrification and microalgal assimilation. In flask-based studies, the effects of light intensity (~140–187 µmol/m2.s−1 v/s ~33–50 µmol/m2.s−1), inoculum density (0.26 g/L v/s 2.19 g/L), and aeration (intermittent shaking v/s continuous shaking) on process efficiencies were assessed. Almost complete removal of up to 87 mg/L ammonia was achieved with continuous aeration, and complete nitrogen removal was encouraged by applying intermittent aeration (10:14 h ratio static to shaking conditions). Low light intensity was associated with acidity (pH 4.6), resulting in stationary growth. In 16.7 L photobioreactors, the pH remained in the optimal range for nitrifiers and microalgae, and 234 mg/L ammonia were removed within 20 days, accompanied by high alkalinity consumption. Akin to the flask studies, nitrogen removal was successfully achieved with intermittent aeration (14:10 h). Complete removal of nitrates and nitrites was accomplished by the addition of a readily biodegradable organic electron donor. Overall, this study showed that efficient removal of nitrogen can be achieved in intermittently aerated MAB systems treating tertiary tannery wastewater provided there is sufficient light and organic electron donors.