4 October 2019 in Chemistry of Materials
21 January 2022 in ACS Applied Energy Materials
7 April 2023 in Advanced Energy Materials
The cycling stability of batteries is closely related to the dynamic evolution of solid electrolyte interphases (SEIs) in response to the discharging/charging processes. Here, the state‐of‐the‐art cryogenic transmission electron microscopy (cryo‐TEM) and spectroscopy are utilized to probe the SEI breathing behavior induced by discharging/charging on the conversion‐type anode made of Fe2O3 quasi‐cubes. The incorporation of the identical‐location strategy allows the tracking of the evolution of the same SEIs at different charge states. SEI breathing is shown to involve swelling (contracting) upon lithiation (de‐lithiation) driven by the reversible compositional change. Bare Fe2O3 anodes develop an unstable SEI layer due to the intermixing with the lithiation product Li2O, which exhibits a large thickness variation upon breathing as well as excessive growth. A transition from organic to inorganic‐type SEI is also identified upon cycling, which gives rise to significantly increased SEI resistance. To tailor the SEI behavior, N‐doped carbon coating is applied on Fe2O3 (Fe2O3@CN), which can effectively separate the lithiation product from SEI. A thinner and chemically more stable SEI layer develops on Fe2O3@CN, resulting in remarkably enhanced cycling stability compared to bare Fe2O3. This work demonstrates the importance of understanding and optimizing the dynamic behavior of SEIs to achieve better battery performance.
22 December 2023 in ECS Meeting Abstracts
The cycling stability of batteries is closely related to the dynamic evolution of solid electrolyte interphases (SEIs) in response to the discharging/charging processes. Here we utilize the state-of-the-art cryogenic transmission electron microscopy (cryo-TEM) and spectroscopy to probe the SEI breathing behaviour induced by discharging/charging on the conversion-type anode made of Fe2O3 quasi-cubes. The incorporation of the identical-location strategy allows us to track the evolution of same SEIs at different charge states, which unequivocally unravels SEI breathing featured by swelling (contracting) upon lithiation (de-lithiation), and the associated compositional change. Bare Fe2O3 anode develops an unstable SEI layer due to the intermixing with the lithiation product Li2O, which exhibits a large thickness variation upon breathing as well as excessive growth, causing substantial capacity fading within 100 cycles. A transition from organic to inorganic-type SEI is also identified upon cycling, which gives rise to significantly increased SEI resistance. To tailor the SEI behaviour, we apply N-doped carbon coating on Fe2O3 (Fe2O3@CN), which can effectively separate the lithiation product from SEI. A thinner and chemically more stable SEI layer develops on Fe2O3@CN, resulting in remarkably enhanced cycling stability compared to bare Fe2O3. Our work demonstrates the importance of understanding and optimizing the dynamic behaviour of SEIs to achieve better battery performance.
1 November 2022 in Journal of Physics: Conference Series
The low-frequency landing gear walk of aircraft during braking processis studied. Firstly, by virtual of LMS Virtual.Lab motion software, the multi-body dynamic model of the landing gear is established, the motion pair and internal and external loads are applied, and the torsion spring is set at the connection between the landing gear and the fuselage to simulate the flexibility of the landing gear. Then, the variation of friction coefficient of brake discis considered in the model of braking pressure and torque. When the braking control system works, if the braking pressure is less than the limit value, the gear walk is less affected by the friction characteristics of the brake disc. If the braking pressure reaches the limit value, the law of gear walk is the same as that of the pilot's manual control of the braking pressure. At this time, the gear walk is only affected by the positive and negative slope of the friction coefficient of the brake disc. If the friction coefficient curve of the brake disc presents a negative slope, it may cause gear walk, and the greater the absolute value of the slope, the more obvious the gear walk is. Improving the friction characteristics of brake discs can provide a new strategy forgear walk control.