2 December 2019 in ACS Applied Energy Materials
28 January 2021 in 2D Materials
Suitable electrothermal materials with high heating rates at low electric power are highly desirable for de-icing and thermal management applications. Herein, 3D epoxy resin/Ti3C2T
x
MXene composites are synthesised and shown to be promising candidates for electrothermal heaters where the MXene serves as a nanoheater and the epoxy resin spreads the heat. A unidirectional freeze-casting technique was used to prepare an anisotropic Ti3C2T
x
aerogel into which epoxy resin was then vacuum infiltrated and cured. The resulting composite showed an excellent Joule heating performance over repeated heating–cooling cycles. A steady-state temperature of 123 °C was obtained by applying a low voltage of 2 V with 5.1 A current, giving a total power output of 6.1 W cm−2. Such epoxy/MXene aerogel composites, prepared by a simple and cost-effective manner, offer a potential alternative to the traditional metal-based and nanocarbon-based electrothermal materials.
7 February 2022 in ACS Nano
Aerogels are attracting increasing interest due to their functional properties, such as lightweight and high porosity, which make them promising materials for energy storage and advanced composites. Compressive deformation allows the nano- and microstructure of lamellar freeze-cast aerogels to be tailored toward the aforementioned applications, where a 3D nanostructure of closely spaced, aligned sheets is desired. Quantitatively characterizing their microstructural evolution during compression is needed to allow optimization of manufacturing, understand in-service structural changes, and determine how aerogel structure relates to functional properties. Herein we have developed methods to quantitatively analyze lamellar aerogel domains, sheet spacing, and sheet orientation in 3D and to track their evolution as a function of increasing compression through synchrotron phase contrast X-ray microcomputed tomography (μCT). The as-cast domains are predominantly aligned with the freezing direction with random orientation in the orthogonal plane. Generally the sheets rotate toward flat and their spacing narrows progressively with increasing compression with negligible lateral strain (zero Poisson’s ratio). This is with the exception of sheets close to parallel with the loading direction (Z), which maintain their orientation and sheet spacing until ∼60% compression, beyond which they exhibit buckling. These data suggest that a single-domain, fully aligned as-cast aerogel is not necessary to produce a post-compression aligned lamellar structure and indicate how the spacing can be tailored as a function of compressive strain. The analysis methods presented herein are applicable to optimizing freeze-casting process and quantifying lamellar microdomain structures generally.
22 October 2018 in ACS Applied Materials & Interfaces