Jiacheng Wang

Jiacheng Wang

Auto-generated profile, based on publicly available information

Jiacheng Wang

The University of Manchester, Manchester, Manchester, UNITED KINGDOM OF GREAT BRITAIN AND NORTHERN IRELAND

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 April 2023 in Energy & Environmental Materials
Verified
Journal Article
Open access
JWJiacheng Wang
Jiacheng Wang
LCLiquan Chen
Liquan Chen
HLHong Li
Hong Li
FWFan Wu
Fan Wu
All‐solid‐state Li metal batteries (ASSLBs) using inorganic solid electrolyte (SE) are considered promising alternatives to conventional Li‐ion batteries, offering improved safety and boosted energy density. While significant progress has been made on improving the ionic conductivity of SEs, the degradation and instability of Li metal/inorganic SE interfaces have become the critical challenges that limit the coulombic efficiency, power performance, and cycling stability of ASSLBs. Understanding the mechanisms of complex/dynamic interfacial phenomena is of great importance in addressing these issues. Herein, recent studies on identifying, understanding, and solving interfacial issues on anode side in ASSLBs are comprehensively reviewed. Typical issues at Li metal/SE interface include Li dendrite growth/propagation, SE cracking, physical contact loss, and electrochemical reactions, which lead to high interfacial resistance and cell failure. The causes of these issues relating to the chemical, physical, and mechanical properties of Li metal and SEs are systematically discussed. Furthermore, effective mitigating strategies are summarized and their effects on suppressing interfacial reactions, improving interfacial Li‐ion transport, maintaining interfacial contact, and stabilizing Li plating/stripping are highlighted. The in‐depth mechanistic understanding of interfacial issues and complete investigations on current solutions provide foundations and guidance for future research and development to realize practical application of high‐performance ASSLB.

18 April 2023 in Journal of Materials Chemistry A
Verified
Journal Article
Closed access
PDF file
JWJiacheng Wang
Jiacheng Wang
ZZZhenyu Zhang
Zhenyu Zhang
WHWeitao He
Weitao He
ZWZhixuan Wang
Zhixuan Wang
SWSuting Weng
Suting Weng
Fan WuFan Wu
Fan Wu
A Ni-rich (Ni content ≥ 80%) layered oxide (NRLO) cathode is a promising candidate for boosting the energy density of Li-ion batteries due to its high discharge voltage and capacities over 200 mA h g−1. However, hindrance to Li transport due to limited Li-vacant sites, NiO-like rock-salt structures and resistant surface Li residuals restricts its practical electrochemical performances. Herein, controlled water treatment was applied to modify the surface crystal structure and chemical environment of LiNi0.83Co0.11Mn0.06O2 (NCM83), which improved Li transport kinetics within NCM83 lattices and across cathode/electrolyte interfaces. Li–H2O interactions during water treatment caused chemical de-lithiation at the NCM83 surface and induced Li migration from the bulk to the surface of NCM83, facilitating the construction of Li-vacant layered structures at the NCM83 surface after a heat treatment in an oxygen-rich environment. dQ/dV vs. V curves revealed that surface Li vacancies promoted Li migrations in the NCM83 lattice at a low state of charge (SOC), improving the reversibility of the H1 phase transformation of NCM83 and hence boosting the reversible capacity. Additionally, the concurrent removal of Li residuals on the NCM83 surface by water treatment also ameliorated Li transport across cathode/electrolyte interfaces and prevented side reactions induced by Li2CO3 decomposition, enhancing the rate performance and cycling stability of NCM83. NCM83 with Li-vacant surface layered structures and the lowest Li residual content displayed a high 1st cycle reversible capacity of 212.8 mA h g−1 (coulombic efficiency of 94.9%) and capacity retention of 89.4% over 100 cycles.

8 July 2021 in Journal of Materials Research
Verified
Journal Article
Open access
PDF file
MGMichael Greaves
Michael Greaves
MMMana Mende
Mana Mende
JWJiacheng Wang
Jiacheng Wang
WYWenji Yang
Wenji Yang
SBSuelen Barg
Suelen Barg
Among 2D materials, MXenes (especially their most studied member, titanium carbide) present a unique opportunity for application via colloidal processing, as they are electrically conductive and chemically active, whilst still being easily dispersed in water. And since the first systematic study of colloidal MXene rheology was published in 2018 (Rheological Characteristics of 2D Titanium Carbide (MXene) Dispersions: A Guide for Processing MXenes by Akuzum, et al.), numerous works have presented small amounts of rheological data which together contribute to a deeper understanding of the topic. This work reviews the published rheological data on all MXene-containing formulations, including liquid crystals, mixtures and non-aqueous colloids, which have been used in processes such as stamping, patterning, 2D and 3D printing. An empirical model of aqueous titanium carbide viscosity has been developed, and recommendations are made to help researchers more effectively present their data for future rheological analysis. Graphic abstract

28 January 2021 in 2D Materials
Verified
Journal Article
Open access
PDF file
PYPei Yang
Pei Yang
TXTian Xia
Tian Xia
SGSubrata Ghosh
Subrata Ghosh
JWJiacheng Wang
Jiacheng Wang
SRShelley D Rawson
Shelley D Rawson
SBSuelen Barg
Suelen Barg
Suitable electrothermal materials with high heating rates at low electric power are highly desirable for de-icing and thermal management applications. Herein, 3D epoxy resin/Ti3C2T x MXene composites are synthesised and shown to be promising candidates for electrothermal heaters where the MXene serves as a nanoheater and the epoxy resin spreads the heat. A unidirectional freeze-casting technique was used to prepare an anisotropic Ti3C2T x aerogel into which epoxy resin was then vacuum infiltrated and cured. The resulting composite showed an excellent Joule heating performance over repeated heating–cooling cycles. A steady-state temperature of 123 °C was obtained by applying a low voltage of 2 V with 5.1 A current, giving a total power output of 6.1 W cm−2. Such epoxy/MXene aerogel composites, prepared by a simple and cost-effective manner, offer a potential alternative to the traditional metal-based and nanocarbon-based electrothermal materials.

23 February 2021 in Nanotechnology
Verified
Journal Article
Open access
PDF file
PYPei Yang
Pei Yang
GTGustavo Tontini
Gustavo Tontini
JWJiacheng Wang
Jiacheng Wang
IKIan A. Kinloch
Ian A. Kinloch
SBSuelen Barg
Suelen Barg
The traditional freeze-casting route for processing graphene-based aerogels is generally restricted to aqueously dispersed flakes of graphene oxide (GO) and post-processing reduction treatments, which brings restrictions to the aerogels electrical properties. In this work, we report a versatile aqueous processing route that uses the ability of GO todisperse graphene nanoplatelets (GNP) to produce rGO-GNP lamellar aerogels via unidirectional freeze-casting. In order to optimise the properties of the aerogel, GO-GNP dispersions were partially reduced by L-ascorbic acid prior to freeze-casting to tune the carbon and oxygen (C/O) ratio. The aerogels were then heat treated after casting to fully reduce the GO. The chemical reduction time was found to control the microstructure of the resulting aeorgels and thus to tune their electrical and mechanical properties. An rGO-GNP lamellar aerogel with density of 20.8 ± 0.8 mg cm−3 reducing using a reduction of 60 min achieved an electrical conductivity of 42.3 S m−1. On the other hand, an optimal reduction time of 35 min led to an aerogel with compressive modulus of 0.51 ±0.06 MPa at a density of 23.2 ± 0.7 mg cm−3, revealing a compromise between the tuning of electrical and mechanical properties. We show the present processing route can also be easily applied to produce lamellar aerogels on other graphene-based materials such as electrochemically exfoliated graphene.

5 August 2026 in Energy & Environmental Materials
Verified
Journal Article
Open access
BYBangxun Yin
Bangxun Yin
JQJack J. Quayle
Jack J. Quayle
JWJiacheng Wang
Jiacheng Wang
DWDavid Wilde
David Wilde
IPIvan Parkin
Ivan Parkin
JDJawwad A. Darr
Jawwad A. Darr
A room temperature, continuous coprecipitation process with in‐line dynamic mixing (ACTIM) was used to synthesize a precursor (up to 0.42 kg h −1 ) to the high‐voltage cathode LiNi 0 . 5 Mn 1 . 5 O 4 (LNMO), consuming ~39% less energy at the coprecipitation step than a more conventional batch synthesis route. The coprecipitate was lithiated in air via a two‐step heat treatment (500 °C/5 h and then 850 °C/12 h), followed by a third treatment at 650, 700 or 750 °C to tune cation disorder. X‐ray Photoelectron Spectroscopy (XPS) gave surface Mn 3+ fractions of ca. 38, 46 and 53% for the 650, 700 and 750 °C samples, respectively, with (Mn K‐edge) X‐ray Absorption Spectroscopy (XAS) indicating the same trend in the bulk. The 750 °C sample under electrochemical testing, delivered a specific capacity of 124, 116 and 81 mAh g −1 at 0.1, 1 and 5 C, respectively. Furthermore, adding 2.5 wt % multi‐walled carbon nanotubes (MWCNTs) to the electrode raised the rate capability to 98 mAh g −1 at 5 C and 91 mAh g −1 at 10 C, with 98.4% capacity retention after 100 cycles at a 1 C current rate. The primary contribution of this work lies in demonstrating that a scalable, ambient temperature, energy‐efficient continuous‐flow coprecipitation process can produce LNMO cathodes with tunable disorder‐related characteristics.