1 January 2020 in Physics of Fluids
This study investigates the passive flow control phenomena over a two-dimensional circular cylinder using numerical simulations in the laminar regime. The aim is to explore one of the passive control techniques, which involves the introduction of a slit to the geometry of the cylinder. The two parameters, slit width ratio S/D (slit width/diameter) and slit angle (measured with respect to the incoming flow direction), play an essential role in determining the trend of critical Reynolds number (Rec). Most of the analysis invokes flow visualization and saturation amplitude methods to obtain the critical Reynolds number (indicative of the onset of vortex shedding) for different cases. Furthermore, Hopf bifurcation analysis using the Stuart-Landau equation and global stability analysis confirm the accuracy and consistency in the predicted solutions. The additional amount of flow through the slit increases the pressure downstream of the cylinder, which consequently leads to an increase in Rec of the modified cylinder. The critical Reynolds number increases with S/D of the modified cylinder at 0° slit angle (as an additional amount of flow grows with S/D). The critical Reynolds number shows an increasing trend with the slit angle in the range of S/D = 0.05–0.15 as the fluctuation intensity reduces with the slit angle in this range. For S/D = 0.15–0.25, the extra amount of flow through the slit induces instability in the wake, which causes a decrease in Rec with the slit angle. A correlation is obtained, which estimates the critical Reynolds number for a given S/D and slit angle.
1 December 2021 in Physics of Fluids
The present work numerically investigates vortex-induced vibrations (VIV) of a two-dimensional circular cylinder with an axisymmetric slit at Reynolds number 500. The study examines the effects of slit shape (i.e., converging, diverging, and parallel slits), the effect of slit-area ratios, slit width, and its angle with the freestream velocity on aerodynamic forces, vibration response, and associated flow characteristics. The results demonstrate that the addition of the slit assists the VIV suppression by adding an extra amount of flow to the main flow. It results in the stabilized wake with the pressure recovery downstream of the cylinder and causes a reduction in the lift force over the cylinder. Also, there exist different shedding patterns associated with different slit shapes. A proper orthogonal decomposition of the flow field suggests that among all the three slits, the parallel slit heavily modifies the flow behind the cylinder by distributing the amount of energy to a large number of modes as compared to other slits (converging slit and diverging slit), where the most of the energy is contained in a couple of modes. Further, increasing the slit angle (for parallel slit) with respect to the freestream increases the slit effectiveness up to a specific value of slit-angle and beyond that starts to affect the VIV suppression adversely. Observations for the effect of slit width are also reported from the perspective of suppression of VIV.
1 April 2024 in Physics of Fluids
Wake interference between turbines in wind farms can lead to significant losses in the overall power output from farms. Wake steering is a strategy in which yaw is introduced in the upstream turbines with respect to the incoming flow field to reduce wake interference with downstream turbines. To characterize the effectiveness of wake steering for turbines located on a hilly terrain, an open source simulator for wind farm applications has been used to perform large eddy simulations (LESs) of a 5 megawatt (MW) wind turbine located at the base of a sinusoidal hill. The height and length of the hill, as well as the turbine yaw angle, are systematically varied over a series of 10 simulations in which inflow corresponds to the neutral atmospheric boundary layer. Results from the LES statistics show that, for a given yaw angle, the power output from the turbine is determined primarily by the height of the hill, rather than the length of the hill. The magnitude of the centerline wake deficit and equivalent wake radius are reduced due to the presence of hills and are not very sensitive to the yaw angle. The theoretical prediction of the wake recovery appears to qualitatively agree with the LES statistics. The yaw-induced spanwise wake deflection is not affected by the hill height significantly. Streamwise vorticity distribution within the lower half of the wake intensifies due to the presence of strong mean velocity gradients present near the surface of the hill, which, in turn, leads to a reduction in the distortion of the shape of a wake deficit cross section.