The effects of confinement on vortex-induced vibration (VIV) of a circular cylinder (diameter D) and its flow power extraction capability are presented. A two-dimensional numerical study is performed on VIV of a circular cylinder inside a parallel plate channel of height H at Reynolds numbers 100 and 150. The blockage ratio (b = D/H) is varied from 1/4 to 1/2. The cylinder is elastically mounted with a spring such that it can only vibrate transversely to the flow. It has a fixed non-dimensional mass (m*) of 10. The energy extraction process is modeled as a damper (damping ratio ζ) attached to the cylinder. With increasing blockage, the vibration amplitude of the cylinder decreases, the lock-in happens at a larger non-dimensional natural frequency of the cylinder, and the initial branch of the vibration response of the cylinder shrinks. There is a minimum value of the channel height and Reynolds number for the existence of the initial branch. The extracted power is found to increase rapidly with the blockage. For the maximum blockage (b = 1/2), the flow power extracted by the cylinder is an order of magnitude larger as compared to what it would extract in an open domain with free stream velocity equal to the channel mean velocity. The optimal mass-damping (α = m*ζ) for extracting the maximum power is found to lie between 0.2 and 0.3. An expression is derived to predict the maximum extracted power from the undamped response of a confined/unconfined cylinder.
23 March 2017 in Journal of Mechanical Science and Technology
This study investigates the passive flow control phenomena over a two-dimensional circular cylinder using numerical simulations in the laminar regime. The aim is to explore one of the passive control techniques, which involves the introduction of a slit to the geometry of the cylinder. The two parameters, slit width ratio S/D (slit width/diameter) and slit angle (measured with respect to the incoming flow direction), play an essential role in determining the trend of critical Reynolds number (Rec). Most of the analysis invokes flow visualization and saturation amplitude methods to obtain the critical Reynolds number (indicative of the onset of vortex shedding) for different cases. Furthermore, Hopf bifurcation analysis using the Stuart-Landau equation and global stability analysis confirm the accuracy and consistency in the predicted solutions. The additional amount of flow through the slit increases the pressure downstream of the cylinder, which consequently leads to an increase in Rec of the modified cylinder. The critical Reynolds number increases with S/D of the modified cylinder at 0° slit angle (as an additional amount of flow grows with S/D). The critical Reynolds number shows an increasing trend with the slit angle in the range of S/D = 0.05–0.15 as the fluctuation intensity reduces with the slit angle in this range. For S/D = 0.15–0.25, the extra amount of flow through the slit induces instability in the wake, which causes a decrease in Rec with the slit angle. A correlation is obtained, which estimates the critical Reynolds number for a given S/D and slit angle.
20 November 2014 in Flow, Turbulence and Combustion
Effect of a large-scale vortical structure on mixing and spreading of a shear layer is numerically investigated. Two strut configurations, namely, straight and tapered struts at two convective Mach numbers (Mc = 1.4 and 0.37) for two jet heights (0.6 and 1 mm) are investigated. The hydrogen jet is injected through a two-dimensional slot in oncoming coflow at Mach 2. An excellent agreement between simulated and experimental data is witnessed, whereas the instantaneous data reveal the presence of various large-scale structures in the flow field. From the instantaneous field, it becomes apparent that both the geometries have different vortical breakdown locations. It is also noticed that an early onset of vortex breakdown manifests itself into the mixing layer thickness enhancement, the effect of which is reflected in overall mixing characteristics. It becomes evident that the shear strength plays an important role in the near field mixing. The higher shear strength promotes the generation of large vortices. The analysis shows that the SS-0.6 case offers highest mixing efficiency being dominated by relatively large-scale structures. Eigenmodes obtained through Proper Orthogonal Decomposition (POD) confirm the presence of dominating structures and shed light into the series of events involved in vortex pairing/merging and breakdown. Dynamic modal decomposition also strengthens the observation made through the POD.
1 September 2021 in European Journal of Mechanics - B/Fluids