The proportional-integral speed controller is widely used in field-oriented control due to its simplicity in implementation; however, parameter variations and load disturbance easily lead to the deterioration of its dynamic performance. To address the aforementioned problem, a composite sliding mode speed control (CSMSC) is proposed in this article, which is composed of a sliding mode controller based on a new fast reaching law (FRL-SMC) and an extended state observer (ESO). The FRL-SMC can effectively solve the contradiction between response time and chattering amplitude, which is superior to the traditional SMC approaches; the lumped disturbance is estimated online by the ESO, and then the estimated value used as feedforward compensation is introduced into the FRL-SMC to enhance the disturbance reject ability. The sinusoidal doubly salient electromagnetic machine (SDSEM) speed regulation system applying the proposed CSMSC obtains a fast startup response and load step response, an excellent antidisturbance performance, and a small q -axis current steady chattering. Finally, the effectiveness of the proposed method is verified by experimental results for a SDSEM test platform.
14 February 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper proposes a fault diagnosis and fault-tolerant control method for three fault modes of current sensors in the doubly salient electromagnetic motor (DSEM) drive system, namely signal loss, gain variation, and zero offset. Firstly, the fault features of current sensors under different fault modes are extracted based on the variation characteristics of three-phase currents in different working sectors to locate and distinguish the fault. Then, a fault-tolerant control method for current sensors is developed to reconstruct the fault phase current under the signal-loss fault and compensate the current online under the gain-variation and zero-offset faults, based on the remaining healthy phase currents and estimated fault coefficients. The proposed method only requires information of three-phase currents and the rotor position, instead of an accurate system model, and immunizes the variation of load and field current, having the advantages of simple implementation and superior robustness. Both simulation and experimental results verify the effectiveness of the proposed method.
28 March 2023 in IEEE Transactions on Industry Applications
In view of the high temperature operation characteristics of the embedded starter/generator for the more electric engine (MEE), the influence of material property change on motor performance at high temperature is studied. Furthermore, considering the influence of high temperature, the electromagnetic calculation of doubly salient electro-magnetic machine (DSEM) is carried out, and the excitation design principle of DSEM under high temperature is pointed out. The performance of DSEMs using DW310 silicon steel and 1J22 iron-cobalt alloy material was compared. Based on the silicon steel material, the structural parameters of DSEM are analyzed. According to the key parameters obtained from structural parameter analysis, Box-Behnken method and genetic algorithm were used to carry out the multi-parameter and multi-objective optimization design. The optimization objectives include excitation current, voltage ripple and cogging torque, to meet the torque and power quality requirements of MEE. Then the performance of DSEM at room temperature and high temperature is analyzed by the finite element method, which verifies the effectiveness of the design. Finally, a high-temperature and high-speed DSEM prototype was processed. At the same time, in order to cooperate with the test, a DSEM ground simulation test system platform for MEE was built to test the prototype. Its design experience lays a foundation for the embedded DSEM design of more electric aircraft.
10 February 2023 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Doubly salient electromagnetic machine (DSEM) has the advantages of simple construction, easy power generation control and convenient fault de-excitation, making it a promising application in the aviation field. Aviation power generation system puts forward higher requirements for the reliability of generators. Despite the various studies on the fault-tolerant control of DSEM, there are few studies on fault-tolerant control of excitation fault in aviation power generation system. Therefore, the main purpose of this paper is to achieve fault-tolerant power generation (FTPG) system for doubly salient electromagnetic generator (DSEG) on the event of excitation fault and improve the fault tolerance ability of the system, while can improve output power and reduce copper loss of DSEG under loss of excitation. This paper analyses the basic principle of normal power generation about DSEG, establishes its equivalent circuit after excitation loss, and dissects the control strategy for the FTPG with loss of excitation based on a bridge converter. Besides, this paper also proposes a fault-tolerant control system and its control strategy based on a capacitor split-phase bridge (CSPB) converter for DSEG, with higher generated power as well as lower copper loss. Based on the above hypothesis, experiments are performed on a power generation system for 12/8 pole DSEG to verify the feasibility of the proposed method.
18 March 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
The excitation loss of doubly salient electromagnetic generator (DSEG) can be caused by the fault in the excitation winding due to aging, overheating, external force impacts, as well as the fault in the excitation power converter due to reasons such as over-current and reverse voltage shocks, which makes the system exhibit abnormal operation. Consequently, a fault-tolerant power generation (FTPG) strategy is proposed for the DSEG system under excitation loss, which can enhance the DSEG’s fault-tolerant capability and mitigate the copper loss. First, this paper analyzes the fundamental principles of normal power generation in DSEG, establishes its mathematical model under excitation loss, and investigates the fault-tolerant control strategy. Subsequently, this paper analyzes the mechanism behind the high copper loss issue in implementing the positive and negative excitation angle control (PNEAC) strategy during the fault-tolerant operation of the DSEG under excitation loss. Furthermore, a positive and negative current given control (PNCGC) strategy with an advanced angle is proposed for FTPG, to optimize copper loss of DSEG under excitation loss. According to the mentioned hypothesis, some experiments are performed on an 18/12 pole DSEG system to demonstrate the feasibility and effectiveness of the proposed strategy.
This paper presents a novel interior permanent magnet motor for electric vehicles with low cost and robust working performance. The key innovation of this paper lies in achieving the goal by adopting an asymmetric rotor structure with a hybrid PM arrangement of V and VV, without increasing the amount of PM material or manufacturing costs. Firstly, in order to determine the proper rotor structure, the design principle of PM arrangements and magnetic barrier shapes for robust working performance, considering anti-demagnetization capability and torque performance, is first analyzed by the analytical method and the finite element analysis (FEA) method. And then, multi-objective optimization of the initial motor is carried out to obtain the optimal values of the motor structure parameters that can comprehensively achieve low cost and robust electromagnetic performance. Finally, the effectiveness of the proposed motor is verified by comparing its performance with that of a symmetric rotor motor, and a prototype of the proposed motor is also manufactured for experimental verification.