6 January 2021 in IEEE Transactions on Industrial Electronics
The complexity of winding distribution of doubly salient electro-magnetic machine (DSEM) results in its uneven temperature distribution, and its temperature rise characteristics under different working conditions need to be further studied. Different from the thermal analysis method of uniformly distributed electrical machine, this article proposes a time-saving thermal analysis method for the new topology of DSEM. In view of the sensitive change of DSEM excitation loss with temperature, the magnetic-thermal bidirectional coupling method is adopted. Considering the temperature difference between excitation and armature coils, a detailed thermal model is established for the armature-excitation slot. The number of bidirectional coupling iterations of finite-element method is reduced by steady-state temperature prediction. Then the temperature distribution of DSEM is analyzed in detail, and the variation of the temperature distribution under different operating conditions is studied. The temperature rise characteristics of a three-phase 12/8-pole prototype are tested to verify the correctness of the proposed method. The research results can provide reference for the temperature evaluation of DSEM and its electromagnetic and cooling design.
27 October 2021 in IEEE Transactions on Power Electronics
Aiming at the problem that the traditional doubly salient electromagnetic machine (DSEM) cannot work when the excitation loss occurs, this article designs and analyzes a fault-tolerant DSEM for excitation loss, and the torque ripple suppression strategy under the fault-tolerant operation is studied. First, the characteristics of the output torque of DSEM before and after excitation-loss is analyzed, and a DSEM with a novel winding configuration is proposed to improve the fault tolerance. Second, under normal/excitation-loss conditions, the structure parameters of the fault-tolerant DSEM are analyzed to reveal the influence of the motor structure on its performance. Then, the steady-state torque of the fault-tolerant DSEM is compared with the traditional DSEM and the switched reluctance motor with the same size, which proves the effectiveness of the fault-tolerant design. By analyzing the inductance and torque characteristics, a torque ripple suppression strategy is proposed for the fault-tolerant DSEM without increasing the complexity of the system. Finally, a prototype is developed, and the experimental results verify the fault-tolerant capability of the prototype and the effectiveness of the proposed torque ripple suppression strategy. The research results of this article provide a specific implementation method for the fault-tolerant system design of DSEM under excitation loss.
30 August 2022 in IEEE Transactions on Industrial Electronics
The proportional-integral speed controller is widely used in field-oriented control due to its simplicity in implementation; however, parameter variations and load disturbance easily lead to the deterioration of its dynamic performance. To address the aforementioned problem, a composite sliding mode speed control (CSMSC) is proposed in this article, which is composed of a sliding mode controller based on a new fast reaching law (FRL-SMC) and an extended state observer (ESO). The FRL-SMC can effectively solve the contradiction between response time and chattering amplitude, which is superior to the traditional SMC approaches; the lumped disturbance is estimated online by the ESO, and then the estimated value used as feedforward compensation is introduced into the FRL-SMC to enhance the disturbance reject ability. The sinusoidal doubly salient electromagnetic machine (SDSEM) speed regulation system applying the proposed CSMSC obtains a fast startup response and load step response, an excellent antidisturbance performance, and a small q -axis current steady chattering. Finally, the effectiveness of the proposed method is verified by experimental results for a SDSEM test platform.
14 June 2019 in IEEE Transactions on Industrial Electronics
Owing to the merits of smaller voltage ripples, lower armature current and cost compared to full-control (FC), the angular position semi-control (APSC) scheme is proposed in this paper for low speed range of the doubly salient electro-magnetic generator (DSEG) operating over wide speed range, which improve the output voltage without increasing the field current. In APSC, the energy is stored with positive current in the inductance rising area and negative current in the inductance falling area, by which the output power and voltage increase, and the excitation current reduces. Moreover, in order to improve the poor dynamic performance resulting from the large storage capacitor required for APSC, an ideal output voltage model is established according to the ampere-second balance of the energy storage capacitor on the load side firstly. Secondly, several correction methods are investigated to enhance the accuracy of the ideal model. Finally, based on the conduction angle estimation model, a novel output voltage control strategy is put forward. The feasibility and superior dynamic performance of the proposed strategy are validated by the experiment results.
8 June 2022 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Torque ripples caused by the particular doubly salient structure of the doubly salient electromagnetic machine (DSEM) restrict its application in the field requiring high performance. This paper employs the current given function (CGF) to propose a torque ripple reduction strategy for DSEM to enhance the torque capability. The optimal current profile for minimizing the copper loss is obtained based on the theoretical analysis. It is found that the obtained three-phase currents are distributed according to the phase torque coefficient that represents the torque capability of each phase. Then, to minimize the torque ripple and copper loss, four CGFs are proposed to distribute the reference current of each phase according to the torque characteristics of DSEM. Finally, the influence of overlap angle on the proposed strategy is analyzed to select the reasonable CGF and overlap angle under different operating conditions through simulation, improving the current tracking performance and torque-ampere ratio. The simulation and experimental results demonstrate the effectiveness of the proposed strategy in suppressing torque ripple and improving the torque-ampere ratio.
14 February 2024 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This paper proposes a fault diagnosis and fault-tolerant control method for three fault modes of current sensors in the doubly salient electromagnetic motor (DSEM) drive system, namely signal loss, gain variation, and zero offset. Firstly, the fault features of current sensors under different fault modes are extracted based on the variation characteristics of three-phase currents in different working sectors to locate and distinguish the fault. Then, a fault-tolerant control method for current sensors is developed to reconstruct the fault phase current under the signal-loss fault and compensate the current online under the gain-variation and zero-offset faults, based on the remaining healthy phase currents and estimated fault coefficients. The proposed method only requires information of three-phase currents and the rotor position, instead of an accurate system model, and immunizes the variation of load and field current, having the advantages of simple implementation and superior robustness. Both simulation and experimental results verify the effectiveness of the proposed method.