Fengyuan Yu

Fengyuan Yu

Auto-generated profile, based on publicly available information

Fengyuan Yu

School of Electrical Engineering, China University of Mining and Technology, Xuzhou, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 May 2022 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
FYFengyuan Yu
Fengyuan Yu
Hao ChenHao Chen
Hao Chen
WYWenju Yan
Wenju Yan
VPVitor Fernão Pires
Vitor Fernão Pires
Joao MartinsJoao Martins
Joao Martins
Xiaodong LiXiaodong Li
Xiaodong Li
In this article, a novel axial flux double-stator switched reluctance motor (AFDSSRM) is presented and optimized for electric vehicle applications. AFDSSRM adopts the axial arrangement of double-stator and inner rotor structure with a full-pitch winding configuration. The flux generated by the two stators cancels each other at the unaligned position, and then, a low unaligned inductance barely affected by saturation is achieved, which is the primary advantage of the AFDSSRM. First, the topology and power equation of the motor are presented briefly. Due to a large number of dimensional parameters of the proposed structure, comprehensive sensitivity analysis is used to classify the design parameters into strong- and weak-sensitive classes, and a multilayer optimization approach is adopted for the variables of both classes. The response surface method combined with the multiobjective genetic algorithm is employed to optimize the strong-sensitive variables, while the Taguchi algorithm is applied to optimize the weak-sensitive variables. Moreover, the 3-D finite element model is established to analyze the electromagnetic characteristics of the motor. Finally, a prototype motor is manufactured, and the experimental results verify the effectiveness of the proposed structure and the optimization method.

5 July 2023 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
WYWenju Yan
Wenju Yan
WWWeichao Wang
Weichao Wang
HLHailong Li
Hailong Li
Hao ChenHao Chen
Hao Chen
FYFengyuan Yu
Fengyuan Yu
QWQing Wang
Qing Wang
In order to improve the torque performance and power density of switched reluctance motor, the combination of the axial flux and the radial flux is a suitable and effective method. Based on its operating principle and the characteristics of the hybrid flux structure, this article proposes the new axial-radial flux switched reluctance motors with different stator structures for electric vehicle applications. First, this article describes the topologies and operating principles of two stator structures. Then, the structural parameters of two kinds of motors are derived based on electromagnetic design principles. In order to evaluate the effects of different stator structures, the overall performance of the two proposed motors is studied using three-dimensional finite-element analysis, including the static magnetic characteristics and dynamic performance. Finally, a prototype motor is trialed, and the experimental results obtained are analyzed with the finite element results to verify the excellent performance of the proposed motor.

28 December 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
GWGuoping Wang
Guoping Wang
Hao ChenHao Chen
Hao Chen
FYFengyuan Yu
Fengyuan Yu
WYWenju Yan
Wenju Yan
XWXing Wang
Xing Wang
MGMahmoud Gaafar
Mahmoud Gaafar
This paper presents a new axial flux modular stator hybrid excitation switched reluctance motor (AFMHSRM) by applying modular stator and hybrid excitation structures. First, the initial dimensions of three AFMHSRMs with permanent magnet (PM) located at different positions in the stator are presented. The torque and flux linkage characteristics of the AFMHSRM are qualitatively analyzed and compared based on the magnetic equivalent circuit (MEC)method. The influence of the PM itself and PMs’ position in the stator on the static characteristics of the AFMHSRM is compared by the finite element analysis (FEA) method. Simultaneously, it is analyzed the influence of the PM thickness and the number of rotor poles on the torque of the proposed motor. The AFMHSRM structure with optimal performance is identified as the final topology and optimized for performance. Subsequently, the steady and transient state performances of the three AFMHSRMs and the conventional axial flux modular-stator switched reluctance motor (AFMSRM) are compared in the MATLAB/Simulink environment. Finally, an AFMHSRM prototype is fabricated based on the optimized dimensions. The simulation and experimental results verify the effectiveness of the proposed structure and the performance enhancement of the hybrid excitation structure for the axial flux switched reluctance motor.

2 May 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
WYWenju Yan
Wenju Yan
WWWeichao Wang
Weichao Wang
HLHailong Li
Hailong Li
Hao ChenHao Chen
Hao Chen
FYFengyuan Yu
Fengyuan Yu
HYHongwei Yang
Hongwei Yang
Based on the characteristics of axial flux switched reluctance motor (SRM) and radial flux SRM, this paper proposes a new type of axial radial flux segmental rotor switched reluctance motor (ARFSRSRM). The motor has the left and right dual axial stator structures, which forms a kind of axial flux path with the segmental rotor in the middle, and a radial stator structure, which shares a kind of radial flux path with the segmental rotor on the outside of the motor. Compared with the conventional SRM, this motor combines the advantages of high output torque and torque density due to the inclusion of two kinds of flux paths, making it suitable for high-efficiency and high-torque fields such as electric vehicles. In this paper, the topology and operating principle of the new motor are first introduced. Then the initial structural parameters are derived, and the multi-objective optimization of the proposed motor is carried out using Taguchi’s algorithm. The static and dynamic performance of the motor is comprehensively analyzed using the 3-D finite element method. Finally, the experimental results obtained through the trial production of a prototype machine verify the good performance of the new motor.

3 October 2024 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
GWGuoping Wang
Guoping Wang
Hao ChenHao Chen
Hao Chen
FYFengyuan Yu
Fengyuan Yu
WYWenju Yan
Wenju Yan
HYHongwei Yang
Hongwei Yang
SFShamiyev Murat Fikhratovich
Shamiyev Murat Fikhratovich
This paper proposed a novel 4-Level T-Type Reconfigurable Fault-tolerant Converter (4L-TRFC) to match the segmented winding structure and high torque performance of Axial Flux Modular-Stator Hybrid-Excitation Switched Reluctance Motor (AFMHSRM). The 7 operating voltage levels and 17 operating modes generated by the proposed converter can improve the converter’s fault tolerance while increasing the motor’s base speed and power. Firstly, the topology and operating principle are introduced, and the corresponding control strategy with fault protection and fault-tolerance method is proposed. Then, the effects of the control parameters on the torque of the driven motor and the performance during fault and fault tolerance are analyzed in detail through simulation, and the proposed converter is compared with other converters. Finally, the proposed converter-based AFMHSRM drive system is built for experimental testing, and the simulation and experimental results verify the proposed power converter’s effectiveness and high fault tolerance.

21 June 2021 in IEEE Transactions on Applied Superconductivity
Verified
Journal Article
Closed access
Hao ChenHao Chen
Hao Chen
FYFengyuan Yu
Fengyuan Yu
WYWenju Yan
Wenju Yan
MOMohamed Orabi
Mohamed Orabi
The eddy-current loss of switched reluctance motor (SRM) is studied and analyzed in this paper. As a significant part of core loss, eddy-current loss has a great influence on motor performance. First, the average magnetic flux waveforms in every distributed region are derived from the magnetic equivalent circuit (MEC) model. Based on this, each harmonic of magnetic density is obtained by adopting the fast Fourier transform (FFT) method for further calculation. Then, each harmonic eddy-current loss is computed by sinusoidal magnetic density and the total eddy-current loss in different region of motor is derived by superposing of them. Therefore, the calculated results at different speed and conduction angles of each region are analyzed. Finally, the 3D finite element (FE) model is established in software FLUX and the experimental platform of the SRM prototype is built.