11 October 2019 in Science
Getting more bits out of PCRAM: Phase-change random access memory (PCRAM) has the ability to both store and process information. It also suffers from noise and electrical drift due to damage that accumulates during the cycling process. Ding et al. developed a phase-change heterostructure where a phase-change material is separated by a confinement material, creating an alternating stack (see the Perspective by Gholipour). This architecture results in ultralow noise, lower drift, and stable multilevel storage capacity, which are potentially useful for new forms of computing. Science , this issue p. 210 ; see also p. 186
30 March 2023 in Advanced Science
Metavalent bonding (MVB) is characterized by the competition between electron delocalization as in metallic bonding and electron localization as in covalent or ionic bonding, serving as an essential ingredient in phase‐change materials for advanced memory applications. The crystalline phase‐change materials exhibits MVB, which stems from the highly aligned p orbitals and results in large dielectric constants. Breaking the alignment of these chemical bonds leads to a drastic reduction in dielectric constants. In this work, it is clarified how MVB develops across the so‐called van der Waals‐like gaps in layered Sb2Te3 and Ge–Sb–Te alloys, where coupling of p orbitals is significantly reduced. A type of extended defect involving such gaps in thin films of trigonal Sb2Te3 is identified by atomic imaging experiments and ab initio simulations. It is shown that this defect has an impact on the structural and optical properties, which is consistent with the presence of non‐negligible electron sharing in the gaps. Furthermore, the degree of MVB across the gaps is tailored by applying uniaxial strain, which results in a large variation of dielectric function and reflectivity in the trigonal phase. At last, design strategies are provided for applications utilizing the trigonal phase.
1 August 2019 in APL Materials
Fast and reversible phase transitions in chalcogenide phase-change materials (PCMs), in particular, Ge-Sb-Te compounds, are not only of fundamental interests but also make PCMs based random access memory a leading candidate for nonvolatile memory and neuromorphic computing devices. To RESET the memory cell, crystalline Ge-Sb-Te has to undergo phase transitions first to a liquid state and then to an amorphous state, corresponding to an abrupt change in electrical resistance. In this work, we demonstrate a progressive amorphization process in GeSb2Te4 thin films under electron beam irradiation on a transmission electron microscope (TEM). Melting is shown to be completely absent by the in situ TEM experiments. The progressive amorphization process resembles closely the cumulative crystallization process that accompanies a continuous change in electrical resistance. Our work suggests that if displacement forces can be implemented properly, it should be possible to emulate symmetric neuronal dynamics by using PCMs.
1 October 2025 in Nature Materials
Spontaneous structural relaxation is intrinsic to glassy materials due to their metastable nature. For phase-change materials, the resultant temporal change in electrical resistance seriously hampers neuromorphic computing applications. Here we report an ab-initio-calculation-informed design of amorphous phase-change materials composed of robust ‘molecule-like’ motifs, depriving the amorphous alloy of critical structural ingredients responsible for relaxation and, hence, resistance drift. We demonstrate amorphous CrTe 3 thin films that display practically no resistance drift at any working temperature from −200 °C to 165 °C, and highlight the multilevel encoding ability via a hybrid opto-electronic approach. We further reveal that the same no-drift behaviour holds for melt-quenched amorphous CrTe 3 in electronic devices. Moreover, the application potential of CrTe 3 is testified by its incorporation in a vehicle with an automatic path-tracking function. Our work provides an alternative route to achieve requisite properties for potential phase-change neuromorphic computing via the judicious design of disordered phase-change materials.
25 August 2024 in npj Computational Materials
Chalcogenide phase-change materials (PCMs) are showing versatile possibilities in cutting-edge applications, including non-volatile memory, neuromorphic computing, and nano-photonics. However, for embedded phase-change memory applications, conventional PCMs suffer from insufficient thermal stability because of their relatively low crystallization temperatures (Tx). Although doping with additional alloying elements could improve the amorphous stability, it also increases the tendency towards compositional partitioning and phase separation. Recently, a two-dimensional (2D) layered compound CrGeTe3 (CrGT) was developed as a PCM, showing a high Tx ~ 276 °C with an inverse change in resistive-switching character upon phase transition. Here, we report a high-throughput materials screening for 2D layered phase-change chalcogenides. We aim to clarify whether the high Tx and the inverse electrical resistance contrast are intrinsic features of 2D PCMs. In total, twenty-five 2D chalcogenides with CrGT trilayer structures have been identified from a large database. We then focused on selected layered tellurides by performing thorough ab initio simulations and experimental investigations and confirming that their amorphous phase indeed has a much higher Tx than conventional PCMs. We attribute this enhanced amorphous stability to the structurally complex nuclei required to render crystallization possible. Overall, we regard InGeTe3 as a balanced 2D PCM with both high thermal stability and large electrical contrast for embedded memory applications.