22 March 2021 in IEEE Transactions on Signal Processing
Golay complementary sequences (GCS) have found wide applications in radar and communications thanks to their prominent property of complementary autocorrelation. This paper studies the extension of Golay complementary sequences to Golay complementary matrices (GCM), i.e, a pair of matrices whose two-dimensional autocorrelations add to be a two-dimensional $\delta$ -function. While the construction of (real) binary GCM are available in the literature, how to construct the quaternary GCM (and the more general unimodular GCM) remains unknown. We put together this missing piece, and show the feasible size that allows for binary and quaternary GCM. The feasible sizes can be further expanded if the phases of the matrices’ entries can be arbitrary. In addition, we consider the extension of the GCM to the set of $N$ ( $N\geq 2$ ) matrices, whose two-dimensional autocorrelations add to be a two-dimensional $\delta$ -function, which we refer to as autocorrelation complementary matrices (ACM). For $N=4$ , the ACM allows for matrices of arbitrary size. The GCM/ACM can be applied to omnidirectional transmission for a multi-input multi-output (MIMO) communication system with a uniform rectangular array (URA), which is useful for broadcasting cell-wide common messages. We propose two schemes for omnidirectional transmission, one is based on space-time block code (STBC) and the other is based on the dual cross-polarization of the antenna array. Both schemes can be implemented in the radio frequency (RF) analog domain, generating (theoretically) perfect omnidirectional beampattern with low hardware cost.
15 June 2023 in IEEE Transactions on Communications
The wireless in-band full-duplex (IBFD) technology can in theory double the system capacity over the conventional frequency division duplex (FDD) or time-division duplex (TDD) alternatives. But the strong self-interference of the IBFD can cause excessive quantization noise at the output of the analog-to-digital converters (ADCs), which hampers its real implementation. Fortunately, the reconfigurable intelligent surface (RIS) can reconfigure the wireless channels by dynamically adjusting the reflection coefficients, which makes it a promising solution to self-interference mitigation (SIM) for the IBFD system. This paper considers a RIS-assisted IBFD (RAIBFD) system where a full-duplex base station (BS), assisted by a co-located RIS, receives and transmits signals on the same frequency band simultaneously. We propose to jointly design the DL precoding matrix and the RIS coefficients to mitigate the strong self-interference before the ADCs of finite bit resolutions. To gauge the performance of the proposed RAIBFD system, we also consider an idealistic RIS-assisted IBFD (I-RAIBFD) system with ADCs of infinite bit resolutions and RIS-assisted FDD (RAFDD) system, and take them as performance benchmarks. The effectiveness of the proposed RAIBFD system is verified by simulation studies, even if the phases of the RIS have only finite resolutions.
1 August 2019 in IEEE Transactions on Signal Processing
In the public channels, it is desirable to transmit the common signals omnidirectionally to ensure cell-wide coverage. In Part I of this two-part paper, we develop low-cost closed-form omnidirectional precoding designs for a massive multiple-input multiple-output (MIMO) system equipped with a uniform rectangular array (URA). By formulating the omnidirectional transmission design for a general URA as a feasibility optimization problem, we derive an optimal solution based on the complementary set (CS) or the complete complementary codes (CCC). We prove that the precoding vectors based on the CS or CCC sequences can generate a perfectly omnidirectional power radiation pattern. Since both CS and CCC sequences are binary and constant-modulus, the proposed schemes are well suited to be implemented in the radio frequency analog domain with low hardware cost and suppressed peak-to-average power ratio. The numerical results validate the superior performance of the proposed schemes over the existing alternatives.
3 April 2020 in IEEE Transactions on Signal Processing
For the millimeter wave (mmWave) massive multiple-input multiple-output (MIMO) systems, hybrid beam- forming has been proposed to reap a great gain of the large number of antennas with a limited number of radio frequency (RF) chains. The hybrid beamforming relies on a phase shifter network (PSN) in the RF domain to steer the signal power along the desired direction (or subspace). However, the RF circuits connecting the antennas and the RF chains can introduce distinct phase deviations, which need to be calibrated for the effective hybrid beamforming. This paper develops two novel approaches to the estimation and calibration of the PSN in mmWave massive MIMO communication systems under line-of-sight (LOS) and non-LOS channel scenarios. Specifically, we formulate the core phase deviation estimation problem in the calibration task as an optimization program with constant modulus constraints. Efficient algorithms are then developed to estimate the phase deviations that need to be calibrated. To gauge the performance of the proposed schemes, we also derive the Cramer-Rao lower bounds (CRLBs) for the phase estimates. The numerical results validate the effectiveness of our approaches by showing that the proposed algorithms yield estimates whose mean squared errors (MSEs) are close to the CRLBs.
29 June 2022 in IEEE Transactions on Signal Processing
Phase shifter networks (PSN) are now widely used in multi-input multi-output (MIMO) systems for various purposes, from hybrid beamforming to strong interference mitigation. These applications require the phases of the PSN elements to be precisely calibrated, but the phase deviations always exist in practice. This paper proposes a novel over-the-air (OTA) approach to estimate the deviations of the phase shifters at each gear. Having some signal sources transmit pilot signals from unknown directions, we make the phases of the PSN shift across different gears and take the samples of the PSN output. Then the maximum likelihood (ML) estimation of the PSN errors which constitutes a three-way tensor, can be solved effectively by an iterative algorithm. The simulation results verify the effectiveness of the proposed algorithm and show that the root mean square errors (RMSEs) of the phase estimates can closely approach the Cramer Rao Bounds (CRBs).
27 October 2021 in IEEE Transactions on Signal Processing
This paper studies the joint estimation of velocity, AOA, and range (JEVAR) of a target in a multipath environment, which has gain renewed interest with the advent of 5G Internet of Things (IoT) technologies, owing to the numerous emerging localization-related applications. To solve the JEVAR problem, we propose a novel scheme, wherein the target transmits a pair of conjugate Zadoff-Chu (ZC) sequences and the multi-antenna receiver conducts maximum likelihood (ML) estimation. The proposed scheme is computationally efficient: it uses alternating projection (AP) to reduce the high-dimensional problem due to the multipaths to multiple lower-dimensional ones per path; it uses a conjugate pair of ZC sequences to decouple the joint estimation of the frequency and time offsets of each path into two separate estimates. The proposed scheme is highly versatile: it can resolve the multipaths with super resolution in both spatial and temporal domain; it can measure the velocity of the target via estimating the frequency offsets of the line-of-sight (LOS) signal and its multipath reflections. The simulations verify the effectiveness of the proposed scheme by showing that its performance can approach the Cramer-Rao bound (CRB).