Water is one of the main sources of life’s survival. It is mandatory to have good-quality water, especially for drinking. Many types of available filtration treatment can produce high-quality drinking water. As a result, it is intriguing to determine which treatment is the best. This paper provides a review of available filtration technology specifically for drinking water treatment, including both conventional and advanced treatments, while focusing on membrane filtration treatment. This review covers the concerns that usually exist in membrane filtration treatment, namely membrane fouling. Here, the parameters that influence fouling are identified. This paper also discusses the different ways to handle fouling, either based on prevention, prediction, or control automation. According to the findings, the most common treatment for fouling was prevention. However, this treatment required the use of chemical agents, which will eventually affect human health. The prediction process was usually used to circumvent the process of fouling development. Based on our reviews up to now, there are a limited number of researchers who study membrane fouling control based on automation. Frequently, the treatment method and control strategy are determined individually.
The imbalance cost pass-through (ICPT) is a flexible component of the incentive-based regulation (IBR) that empowers power producers to adjust tariffs in response to variable fuel prices, thereby enhancing the economic resilience of electricity generation. In Malaysia, the Energy Commission has conducted biannual reviews of fuel and other generation costs. Any cost savings or increases identified during these reviews will be passed on to customers in the form of rebates or surcharges. Meanwhile, if an increment in the ICPT price signal can be provided to electricity providers and consumers, early preparation for operation budgeting can be realised, and energy management program development can be properly prepared. Due to this reason, this study proposes ICPT price forecasting for the electricity market in Peninsular Malaysia that will benefit the stakeholders. The study aims to construct an ICPT-related baseline model for the peninsular generation data by employing three forecasting methods. The forecasting performance is analysed using the mean absolute percentage error (MAPE). In light of our findings, the ARIMA method is one of the most accurate forecasting methods for fuel prices compared to the moving average (MA) and LSSVM methods. The observed price differences between the ARIMA and LSSVM models for ICPT are minimal. The ICPT price for July–December 2022 and January–June 2023 is MYR 0.21/kWh for the ARIMA and MYR 0.18/kWh for LSSVM, which are close to the actual TNB’s ICPT tariff. As for forecasting, the ICPT price is expected to drop in the next announcement. The findings of this study may have a positive impact on the sustainability of the energy sector in Malaysia.
1 December 2024 in International Journal of Electrical and Computer Engineering (IJECE)
This study presents the development of a smart sprayer system featuring a microcontroller, ultrasonic sensors, and a Wi-Fi module for agriculture. This system enables 360° movement capabilities and facilitates the activation and deactivation of the sprayer pump remotely. The system offers remote control functionality through smartphone integration, effectively mitigating the need for direct physical contact with hazardous chemicals during the spraying operation. The results demonstrate the efficient operation of the smart sprayer system. The average spraying efficacy is estimated to be 95%, surpassing that of conventional spraying methods, as evidenced by prior research studies. The system is accessible for remote operation via a user-friendly interface, facilitated by the integrated internet of things (IoT) and microcontroller. As anticipated, it successfully executed 360° movements, obstacle detection, water level indication, and remote control of the sprayer pump.
1 December 2023 in Indonesian Journal of Electrical Engineering and Computer Science
Ethanol and acetone are volatile organic compound gases widely used in food processing. Health problems such as irritation of the eyes, nose, and throat can affect human health if exposed to these gases. Two graphene gas sensors were fabricated using a screen-printing technique onto a glass substrate to compare their performance to the acetone and ethanol vapors at room temperature. The graphene paste was prepared by mixing 95 wt.% of the binder with 5 wt.% of graphene nanoflakes. A silver paste was used asthe interdigitated electrode of the gas sensor and becamethe first layer of the gas sensor. The silver paste was deposited on the glass substrate using a screen-printing technique and fired at 150°C for 15 minutes. Next, the graphene paste was depositedonto the interdigitated electrode using a screen-printing technique and becamethe second layer of the gas sensor. The graphene was annealed at 200°C for 30 minutes. Both graphene gas sensors responded well to ethanol and acetone vapor with an n-typed gas sensor at room temperature. As a comparison, the graphene gas sensor showed better characteristics in terms of response and recovery characteristicsto ethanol vapor than acetone vapor at room temperature. The response and response time of the graphene-based thick film gas sensor to ethanol were approximately 21.89 and 24.08, respectively.