This paper presents the FloripaSat-2 platform, an open-source service platform already on its second version, including, but not limited to, On-Board Data Handling (OBDH), Telemetry, Tracking and Command (TTC), and Electrical Power System (EPS) modules. The platform is conceived to be general-purpose, i.e., easily adaptable for missions with different payloads and requirements. In this context, an overview of the generic nanosatellite architecture, along with the ongoing missions in which it is being employed, is discussed, including the embedded systems, functionalities, and components. Also, the relevant source code is available in an online repository and can be used and expanded to different kinds of CubeSat missions. Finally, good practices regarding the development and a FlatSat proposal for faster testing of the subsystems are presented to aid engineers in testing and adapting the systems to their mission requirements.
24 February 2023 in IEEE Journal on Miniaturization for Air and Space Systems
Recent trends indicate an increase in the number of small satellite missions, which can be developed more quickly and at a lower cost than traditional satellites. This has led to a growing interest in university-based satellite development, despite a lack of expertise in the space field, which has resulted in a high failure rate for such missions. To address this issue, the implementation of robust and reliable verification and validation (V&V) methods has become essential, and it has been demonstrated that the use of a FlatSat during the V&V campaign increases reliability. Despite the significance of FlatSat, there is a dearth of information on the platforms used to implement it, as well as a classification scheme for locating them. This article contributes to bridging this gap by conducting a systematic mapping of 65 works that were selected based on specific criteria and subsequently analyzed. The primary characteristics of the platforms are enumerated, and a new classification for FlatSat platforms into Raw, Bridge, Dock, and Modular is proposed. In order to provide a comprehensive understanding of the topic, the principal tests conducted on these platforms were also covered.
1 January 2026 in IEEE Journal on Miniaturization for Air and Space Systems