Production scalability, efficiency, and stability challenges continue to impede the commercial viability of perovskite solar cells (PSCs). In this study, a multifunctional passivation technique is introduced, designed to enhance the efficiency and stability of printable, air‐processed PSCs with laminated carbon electrodes. This findings indicate that tin(II) phthalocyanine (SnPC) molecules act as an interfacial layer between the absorber and the hole‐transporting layer (HTL), effectively passivating surface trap states and facilitating hole extraction. Optimal SnPC surface treatment reduces the trap density in the perovskite layer from 2.1 × 1015 to 1.5 × 1015 cm−3, increases carrier mobility (from 2.7 × 10−3 to 2.8 × 10−3 cm2 Vs−1), and extends carrier lifetime. SEM, AFM, EDS, and XPS analyses confirm the presence of SnPC on the perovskite layer surface and its influence on surface morphology. Devices treated with an optimal SnPC concentration exhibit significant efficiency improvements, from 6.4% to 8.5%, along with a threefold increase in photo‐stability. Thus, SnPC may serve as a passivating buffer layer for the perovskite surface, offering protection against photo‐degradation.
This study investigates the influence of spin-coated phosphosilicate glass (PSG) on the crystallization and electrical properties of silicon (Si) thin films deposited by magnetron sputtering, with a focus on optimizing their structural and electrical properties for potential applications in photovoltaics and microelectronics. The results demonstrate that higher spin-coating speeds lead to thinner and more uniform PSG layers, which in turn promote more efficient phosphorus diffusion and enhance film crystallization. Annealing at 950 °C resulted in enhanced dopant activation, improved crystallinity, and reduced sheet resistance. These structural and phase transformations were systematically analyzed by X-ray diffraction (XRD), providing detailed insight into the evolution of the Si thin films during thermal processing. In particular, the XRD results reveal a clear transition from the amorphous to the polycrystalline state, especially for samples processed at optimized spin speeds and elevated annealing temperatures. Optical characterization further showed that thermal annealing modified the reflectance and transmittance spectra and slightly increased the refractive index and extinction coefficient of the sputtered Si films. Overall, the combination of environmentally friendly spin-on doping with scalable physical deposition techniques represents a promising approach for the development of advanced photovoltaic technologies, offering a viable pathway toward sustainable and efficient device fabrication.