Unreinforced masonry (URM) buildings are prone to significant damage when subjected to ground motion. Some strengthening methods have been proposed to increase the seismic capacity. However, the widespread adoption of these methods faces various challenges, including economic constraints experienced by common people in developing countries, the complexity of implementation, efficiency, and seismic safety of each technique. This paper introduces a new retrofitting method of fiber-reinforced paint using fiberglass as the primary reinforcing material. The advantage of this technique lies in its simplicity and ease of application, with the added benefit of using the paint to improve the appearance of the house. Two 1:4 scale concrete hollow block (CHB) masonry houses were constructed to represent unreinforced masonry and retrofitted masonry structures using fiber-reinforced paint (FR-Paint). The shaking table test results indicate that the retrofitted house model showed improvements of up to 18 times in deformation capacity and up to 13 times in energy dissipation compared to the non-retrofitted house model. FR-Paint has a robust performance even in high input motion at a seismic intensity JMA of 7 (Japan Meteorological Agency). This confirms that this retrofitting method has a high earthquake-resistant performance.
1 August 2021 in Journal of Performance of Constructed Facilities
In urban and semiurban areas of Nepal, it is a common practice that the construction of reinforced-concrete (RC) framed buildings with infill masonry have open ground floor as commercial shutter and a parking lot while the upper floor contains infill masonry for residential purposes. A reduction in a story’s infill relative to the ones above increases inelastic deformation on the columns of that story and causes soft story collapse of the open floor. In the 2015 Gorkha earthquake, the number of human casualties in RC buildings and economic loss exposed the deficiencies associated with RC. Although numerous studies have recommended solutions to soft story problems, there is still a lack of practical implementation at the ground level. In this paper, the Applied element method (AEM) was used to analyze the efficiency and applicability of existing solutions to soft story problems in Nepal using and social survey using web questionnaire to understand the social aspects of the soft story problem. Results of this research showed that, although technically there are some retrofitting methods that could solve soft story problems, the large number of existing buildings with soft stories—compounded by low awareness, unstable economic conditions, lack of locally available raw materials, and resistance to closing businesses run in the open story design—render eradicating the problem socially incapable.
13 February 2024 in Journal of Earthquake and Tsunami