8 June 2023 in Nature Electronics
10 November 2023 in Science Advances
InAs semiconductor nanocrystals (NCs) exhibit intriguing electrical/optoelectronic properties suitable for next-generation electronic devices. Although there is a need for both n - and p -type semiconductors in such devices, InAs NCs typically exhibit only n -type characteristics. Here, we report InAs NCs with controlled semiconductor polarity. Both p - and n -type InAs NCs can be achieved from the same indium chloride and aminoarsine precursors but by using two different reducing agents, diethylzinc for p -type and diisobutylaluminum hydride for n -type NCs, respectively. This is the first instance of semiconductor polarity control achieved at the synthesis level for InAs NCs and the entire semiconductor nanocrystal systems. Comparable field-effective mobilities for holes (3.3 × 10 −3 cm 2 /V·s) and electrons (3.9 × 10 −3 cm 2 /V·s) are achieved from the respective NC films. The mobility values allow the successful fabrication of complementary logic circuits, including NOT, NOR, and NAND comprising photopatterned p - and n -channels based on InAs NCs.
16 November 2023 in Advanced Materials
22 July 2025 in Nature Communications
This paper reports a reconfigurable binary–ternary transistor with a controllable voltage range and current level for the intermediate logic state. The proposed functions were demonstrated using an indium–gallium–zinc-oxide channel with a dual-gate structure incorporating two types of dielectrics (with high and low capacitances). This asymmetric dual-gate structure exhibits two key characteristics. First, the threshold voltage can be adjusted by applying a voltage to the control gate opposing the input. Second, partial depletion occurs when the input gate’s capacitance is insufficient, making the off current dependent on the control gate voltage. Two dual-gated channels were connected in series, with inputs applied to the low-capacitance gate of one channel and the high-capacitance gate of the other and the remaining gates served as control gates. This device configuration outputs three current regions: fully depleted (low), partially depleted (intermediate), and accumulated (high) channel currents, which were utilized as logic states for the ternary device. Moreover, the threshold voltage for each channel and the current from the partially depleted channel could be precisely controlled by biasing each control gate. This enables an adjustable voltage range and current level for the intermediate logic state, as well as reconfigurability between binary and ternary operations.
1 May 2026 in Advanced Functional Materials
The growing demand for artificial intelligence (AI) has prompted the development of neuromorphic hardware capable of efficient, parallel, and low‐power computation. To meet the requirements for integration and environmental stability in AI systems, neuromorphic transistors based on robust solid‐state materials are essential. Here, we report an all‐metal‐oxide neuromorphic transistor that employs sodium‐embedded alumina (SEA) as a solid‐state electrolyte and indium‐gallium‐zinc oxide as the semiconducting channel. A thermal annealing process was used to tailor the chemical composition of SEA, enabling precise control over synaptic plasticity and the deterministic realization of both short‐term and long‐term plasticity. The long‐term devices exhibited stable excitatory/inhibitory postsynaptic responses, long‐term potentiation/depression, and paired‐pulse facilitation. Furthermore, we demonstrated neuromorphic circuits including a reconfigurable logic gate (AND and OR), an analog comparator, and a multiply–accumulate array that performed analog signal multiplication and summation using programmable synaptic weights. This study highlights the potential of all‐solid‐state neuromorphic transistors for neuromorphic and analog computing relevant to future AI systems.
25 November 2024 in Research Square
This paper reports a reconfigurable binary–ternary transistor with a controllable voltage range and current level for the intermediate logic state. The proposed functions were demonstrated using an indium–gallium–zinc-oxide channel with a dual-gate structure incorporating two types of dielectrics (with high and low capacitances). This asymmetric dual-gate structure exhibits two key characteristics. First, the threshold voltage can be adjusted by applying a voltage to the control gate opposing the input. Second, partial depletion occurs when the input gate’s capacitance is insufficient, making the off current dependent on the control gate voltage. Two dual-gated channels were connected in series, with inputs applied to the low-capacitance gate of one channel and the high-capacitance gate of the other and the remaining gates served as control gates. This device configuration outputs three current regions: fully depleted (low), partially depleted (intermediate), and accumulated (high) channel currents, which were utilized as logic states for the ternary device. Moreover, the threshold voltage for each channel and the current from the partially depleted channel could be precisely controlled by biasing each control gate. This enables an adjustable voltage range and current level for the intermediate logic state, as well as reconfigurability between binary and ternary operations.