12 February 2018 in Advances in Polymer Technology
Taking into account the difficulty to spin pure keratin fibers, blended fibers of keratin/poly (vinyl alcohol) (PVA) are developed by wet spinning. Effects of keratin content on the structure and properties of blended fibers are analyzed by the combination of scanning electron microscope (SEM), Fourier transform infrared spectroscopy (FTIR), thermogravimetric‐differential thermal analysis (TG‐DTA), and tensile test. The results indicate that the blended fibers have an average diameter about 110 μm with oblate cross section and rough surface. The hydrogen bonds are established between PVA and keratins during the spinning process. The curves of thermal performances of blended fibers are between those of keratin and PVA. In the case of the mechanical properties of blended fibers, they gradually decrease with an increase in keratin content. Hence, it should be pointed out that to obtain satisfactory fibers, the content of keratin in the blended solution has to be less than or equal to 15%.
25 June 2024 in Journal of Applied Polymer Science
18 August 2024 in International Journal of Biological Macromolecules
30 May 2014 in Journal of Polymer Science Part B: Polymer Physics
13 April 2020 in Advances in Polymer Technology
To improve the moisture absorption and air permeability of polyamide (PA) fibers, the modified fibers with porous structure were fabricated by melt spinning using polyethylene glycol (PEG) as the pore-forming agent due to its high solubility in water. The effects of pores caused by different PEG contents on the structure and properties of modified fibers were analyzed by electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and water contact angle. These results indicate that the porosity of modified fibers increases with PEG content increasing. Moreover, the formation of pores obviously affects the crystal forms of modified fibers. The alpha crystal gradually decreases and the gamma crystal increases with the porosity increasing. Furthermore, with respect to the modified fibers obtained from 47.33% PEG content, its water absorption increases from 3.78% of pure PA to 19.76% and its contact angle decreases from 116° to 85°. In addition, due to the interaction of hydrogen bond occurring between PA and PEG during the spinning process, the elongation at break, rupture work, and initial modulus of modified fibers were improved when the porosity was not more than 4.23%.