1 November 2020 in Geophysics
Distributed acoustic sensing (DAS) is a rapidly growing technology for seismic acquisition, with the potential to sample rarely available wavefield components in reservoir settings. How to best use the information that DAS supplies to estimate reservoir properties is an open question. Full-waveform inversion (FWI) of DAS data, alone or in combination with geophone data, is a natural possibility to pursue. A mixed formulation must accommodate particle velocity data and 1C measurements of strain or strain rate in the direction tangent to a fiber-optic cable, which itself may take on some characteristic shape. Expecting that these amplitude and directionality properties of DAS data will impact parameter resolution in FWI, especially when incorporating finite gauge lengths, we have developed two appraisal methods. The first is an analytic description of the relationship between the spatial period and the elastic-wave sensitivity within a helical-wound fiber (which builds on a symmetry class of fibers insensitive to shear strains). The second is an extension of scattering radiation pattern analysis to DAS sensors of arbitrary geometry. We then numerically analyze the FWI response. Using 2D simulations and several simple models including the Marmousi2, we analyze the effect that shaping of the DAS fiber has on parameter estimations, by comparing inversion results derived from straight and various coiled fibers in a horizontal well. Fiber geometry is observed to have important implications for the accuracy and fidelity of DAS-FWI parameter estimates. It is also clear that the complementary features of DAS and standard geophone data impact FWI. Simultaneous inversions of surface geophone and DAS data from horizontal wells convincingly outperform inversions from either data set alone.
3 August 2023 in Geophysics
Seismic data are a significant facilitator for monitoring in carbon capture and sequestration projects, providing high-resolution images of fluid migration, using, for example, full-waveform inversion (FWI). Distributed acoustic sensing (DAS), a relatively novel technology for wavefield sampling, is well suited for this type of monitoring. Using noninvasive optical fibers, DAS allows for dense spatial sampling along the entire length of the wellbore, without disrupting operations. Permanently installed in the wellbore, typically behind casing, DAS offers highly repeatable and dense sampling of the transmitted wave modes crucial to seismic monitoring of injected carbon dioxide (CO2). However, the DAS data consist of measurements of strain along the tangent of the fiber and therefore do not transfer directly to conventional FWI algorithms. Incorporation of DAS data in their native strain (or strain-rate) form in standard FWI algorithms, requires changing the definition of the receiver sampling operator to use geometric information about the fiber to supply tangential strain measurements to the FWI residual. The theoretical developments are applied to invert field vertical seismic profile data acquired with DAS fiber and accelerometers at a CO2 sequestration site in Newell Country, Alberta. Our method incorporates DAS data and accelerometer data in one objective function and allows us to tune the relative importance we wish to place on each data set. This method also transfers to noncollocated sensors, for example, surface-deployed geophones and borehole fiber. The inverted models contain features expected from the geology of the field site, and data modeled in the inverted models compare favorably with the field data for these sensor types. The models are derived from data acquired prior to CO2 injection, representing baseline models for future time-lapse studies planned at the field research station.