6 February 2025 in IEEE Journal of Selected Topics in Quantum Electronics
The recent proliferation of artificial intelligence and machine learning applications relying on large language models is fueling unprecedented demand for compute capacity. Associated with this is a need to scale capacities of short-reach optical transceivers towards multiplex Terabit/s, while maintaining integration density (frontpanel or beachfront density) and energy efficiency (pJ/bit). One option to scale transceiver capacity is to increase the bandwidth per lane from today's 200G to 400G or even higher: coherent transceiver technology is then expected to play an ever more important role. Photonics and electronics with higher bandwidths beyond 100GHz will play a crucial role. Integration of thin-film LiNbO3 modulator onto a Silicon Photonics platform is shown to be a viable option to meet the needs for new generations of optical transceivers. Front-end electronics such as linear modulator drivers and transimpedance amplifiers can rely on traveling-wave design approaches to allow continued bandwidth scaling despite (relative) slowing transistor speeds. Novel wireline data converter architectures can be used to overcome limitations of existing implementations. Maintaining signal integrity from photonics and electronics can be facilitated using both 2.5D and 3D integration approaches. While the introduction of novel materials and architectures will require time to further mature, optical transceivers operating at baudrates up to and beyond 200Gbaud are now just beyond the horizon.
17 March 2025 in Journal of Lightwave Technology
EAEsteban Venialgo Araujo
Light detection and ranging (LiDAR) sensors bring remarkable features to the automotive industry, enabling the development of autonomous vehicles. More concretely, frequency-modulated continuous-wave (FMCW) light detection and ranging (LiDAR) sensors offer several advantages over their time-of-flight (ToF) counterparts in terms of maximum achievable distance, interference immunity, and velocity detection. Nonetheless, FMCW LiDAR systems are inevitably affected by phase noise, limiting the sensor performance. One evident solution consists in using narrow linewidth lasers, at the expense of overall sensor cost. Therefore, in this work, a thorough analysis of the phase noise is conducted for FMCW LiDAR sensors. Moreover, a novel and low-complex phase noise compensation algorithm based on pre-estimation and feedforward correction (PNC-PEFC) is proposed. The PNC-PEFC algorithm is extensively evaluated in an experimental setup under different target distances and additive white Gaussian noise (AWGN) conditions. The experimental results show excellent performance when applying the proposed PNC-PEFC algorithm, proving its robustness across all evaluated conditions.
8 March 2024 in Journal of Lightwave Technology
This paper describes the design and fabrication of a slot waveguide ring-assisted Mach-Zehnder modulator (RAMZM) on the InP membrane on Silicon (IMOS) platform. The low-frequency characterization of this modulator reveals that it can achieve a $V_{\pi }L_{\pi }$ product as low as 5.1 $V.mm$ and an extinction ratio equal to 12 dB. The 3-dB electro-optical bandwidth of this modulator is measured to be 8.5 GHz. This paper discusses working principles, design, fabrication, measurements, analysis of the electrical and electro-optic performance, and the prospects of this modulator.
4 March 2026 in Journal of Lightwave Technology
Laser instantaneous frequency (LIF) describes the time-varying frequency of a laser signal, defined as the temporal derivative of the oscillation phase divided by 2π. This concept is crucial in understanding frequency noise, phase noise, and chirped optical signals, where the frequency changes over time. Most current optical frequency measurements rely on frequency-domain analysis, which face limitations when applied to rapidly chirped lasers. Unlike frequency-domain methods, time-domain methods provide a more accurate representation of the time-varying frequency of chirped lasers, which is crucial for real-time applications. The widely used Hilbert transform-based method describes the LIF measurement but has slow real-time responses, a relatively low measurement speed, a not on-chip-compatible structure, and the ambiguity of the chirp sign, which hampers its use, particularly in real-time applications. This paper introduces a novel real-time LIF estimator for chirped lasers, offering higher accuracy, reduced algorithm complexity, and an on-chip integration solution. Experimental demonstrations include applications for FMCW LiDAR adaptive nonlinearity correction and real-time photoelectric control loops.
12 June 2024 in Optics Express
Radio-frequency orbital angular momentum (RF-OAM) mode multiplexing has received increasing attention in next-generation (6G) wireless communication as a new spatial multiplexing dimension to further extend data capacity. In particular, the circular antenna array (CAA) based RF-OAM generation using photonic methods is a promising approach due to its flexible reconfigurability, low propagation loss, high operating bandwidth, and high pattern quality. However, most current reports focus either on the bulk optics-based implementations or on band-limited delay line-based approaches. In this paper, we present a novel phased array-based integrated photonic RF-OAM generator-multiplexer for a four-antenna CAA system supporting three RF-OAM modes at 16 GHz for both fast mode switching and mode multiplexing. It consists of a specially designed interleaved optical filter and a four-element phased array based on cascaded phase shifters. By changing the pair of wavelengths used, the output RF-OAM modes can be quickly switched between fundamental mode and ±1 modes. A bandwidth of 1 GHz was experimentally demonstrated. Mode multiplexing can be achieved when all three wavelength pairs are loaded.
1 January 2026 in Journal of Lightwave Technology