20 September 2024 in IEEE Transactions on Applied Superconductivity
To suppress the harmonic components of the phase current of dual three-phase permanent magnet synchronous machines (DTP-PMSMs), an improved control strategy based on the multi-input multi-output (MIMO) proportional resonant (PR) controller is proposed in this paper. The control strategy includes the optimization of the controller and the integration of the voltage feedforward compensation method. By analyzing the traditional vector control strategy based on the vector space decoupling (VSD) coordinate transformation, an equivalent MIMO PR controller with parameter tuning is proposed, which can achieve no static error tracking for the alternating current (AC) signals. The controller considers the decoupling compensation in the traditional vector control strategy, which reduces the complexity of the system. The voltage feedforward compensation path includes the extraction of harmonic currents and the derivation of compensation voltage. By using feedforward compensation for specific harmonic components, more effective suppression of harmonic components can be achieved. Finally, the proposed control strategy was experimentally validated on the experimental platform. Compared with the traditional vector control strategy based on the VSD coordinate transformation, under the proposed control strategy, the total harmonic distortion (THD) content of the machine phase current was reduced by 6.12%, verifying the effectiveness and feasibility of the proposed strategy.
9 July 2024 in IEEE Transactions on Applied Superconductivity
The temporal and spatial distribution of electromagnetic force is significantly deteriorated in the permanent magnet synchronous motors (PMSMs) due to rotor eccentricity. Therefore, the noise radiation of PMSMs will inevitably increase, which greatly increases the probability of abnormal operation. In order to accurately and quickly analyze the magnetic field under rotor eccentricity, a two-dimensional (2D) analytical model to predict the eccentric magnetic field of PMSMs using improved conformal mapping method is presented in this article. The 2D analytical model can accurately account for the stator slotting, the winding arrangement, the armature reaction and the rotor eccentricity. Firstly, the topology of rotor eccentricity and stator slot is mapped to the topology of no eccentricity and no slot by using conformal mapping and fractional linear mapping. Then, the magnetic field in the topology without eccentricity and slot is solved analytically. After the inverse transformation, the magnetic field in the original topology is obtained. Finally, the 2D analytical model is validated by finite element method (FEM) and vibration response experiment. The results indicate that the improved conformal mapping method is accurate enough and timesaving.
23 December 2024 in IEEE Transactions on Industrial Electronics
The utilization of inverters and pulse width modulation (PWM) technology in driving permanent magnet synchronous motors (PMSMs) introduces high-frequency sideband electromagnetic force. Consequently, the risk of PMSMs resonance inevitably increases, leading to disruptions in the operating state and increased noise radiation. Two-dimensional (2-D) sideband electromagnetic force, torque ripple, and electromagnetic vibration of PMSMs with integral-slot and fractional-slot winding arrangements are studied in this article. The torque ripple caused by sideband harmonic currents is derived. Rules to reduce electromagnetic vibration are proposed. The results indicate that the sideband electromagnetic forces have both low- and high-frequency characteristics. Torque ripple shows a new high-frequency characteristic. Experimental findings validate the effectiveness of the proposed rules for optimizing electromagnetic vibration, resulting in an 11.1 dB reduction in the 3.5–6.5 kHz band.
21 March 2025 in IEEE Transactions on Magnetics
In order to study the electromagnetic vibration and torque ripple of multi-unit permanent magnet synchronous motors (PMSMs), an analytical model of flux density under multi-unit operation was established. The spatiotemporal characteristics of 2-D air-gap flux density, electromagnetic force, and electromagnetic torque were explored, and the characteristics of electromagnetic force and vibration response under unit-missing operation were analyzed. First, the flux density analytical models under the operation of one unit and k unit motors were established, and the spatiotemporal distribution law of electromagnetic force and electromagnetic torque was analyzed. Then, the vibration response under unit-missing operation was theoretically derived and analyzed; finally, the prototype was simulated and experimentally verified. With k unit motors, the electromagnetic force and torque components exhibit harmonics with angular frequency $2\pi (2hf_{e})$ and $2\pi (6hf_{e})$ , $h\in \mathbb {N}$ , respectively ( $f_{e}$ supply line frequency). The unbalanced electromagnetic pull resulting from the lack of a single unit introduces additional force harmonics, whose frequencies differ from those in balanced operation by multiples of the rotation frequency $f_{r}=f_{e}/p$ (p: pole pairs) that, however, are not generally multiples of $f_{e}$ .