Nuclear magnetic spin-lattice relaxation experiments have been performed in partially filled porous glasses with wetting and nonwetting fluids. The frequency dependence of the spin-lattice relaxation rate in Vycor (4 nm pores) and VitraPOR #5 (1 μm pores) silica glasses was studied as a function of the filling degree with the aid of field-cycling NMR relaxometry. The species of primary interest were water (“polar”) and cyclohexane (“nonpolar”). Spin-lattice relaxation was examined in the frequency range from 1 kHz to 400 MHz with the aid of a field-cycling NMR relaxometer and an ordinary 400 MHz NMR spectrometer. Three different mobility states of the fluid molecules are distinguished: The adsorbed state at the pore walls, the bulklike liquid phase, and the vapor phase. The adsorbate spin-lattice relaxation rate is dominated by the “reorientation mediated by translational displacements” (RMTD) mechanism taking place at the adsorbate/matrix interface at frequencies low enough to neglect rotational diffusion of the molecules. The experimental data are analyzed in terms of molecular exchange between the different mobility states. Judged from the dependence of the spin-lattice relaxation rates on the filling degree, limits for slow and fast exchange (relative to the RMTD time scale) can be distinguished and identified. It is concluded that water always shows the features of slow exchange irrespective of the investigated pore sizes and filling degrees. This is in contrast to cyclohexane which is subject to slow exchange in micrometer pores, whereas fast exchange occurs in nanoscopic pores. The latter case implies that the vapor phase contributes to molecular dynamics in this case at low filling degrees while it is negligible otherwise.
15 November 2003 in The Journal of Chemical Physics
The contribution of the vapor phase to the effective diffusion coefficient of solvents in a partially filled nanoporous silica glass (Vycor) was investigated with the aid of nuclear magnetic resonance diffusometry. Water and cyclohexane as polar and nonpolar adsorbate species show opposite dependencies on the filling factor. The effective diffusion coefficient of water increases with the filling factor, whereas that of cyclohexane decreases. A “two-phase fast-exchange model theory” is presented accounting for these phenomena. In the vapor phase, both Knudsen and ordinary Einstein diffusion were considered. The different dependencies on the filling factor for polar and nonpolar adsorbate species are attributed to different effective tortuosities represented by different exponents in Archie’s law anticipated in the model theory. The fast exchange feature stipulates that the pore size is small enough.
The adsorption of small particles on the surface of an adsorbent depends on interfacial dynamics and associated parameters, including the adsorbate reactivity, adsorbent surface activity, and matrix porosity and tortuosity. Herein, the effect of the surfaces of magnetite, silica/alumina, and silica-cellulose matrix on cadmium adsorption is termed using spectroscopic methods. Atomic absorption spectroscopy was used to determine the adsorption of metal ions in the solid–liquid interfaces by the batch method with different pH, metal concentrations, and contact times. Cadmium (II) were well adsorbed on the magnetite-inorganic surface (around 90% adsorption) rather than other types of semi-organic surfaces, silica, silica-alumina and other cellulosic materials (less than 60% adsorption for Cadmium (II) and 80% of Lead (II) ions). The presence of lead (II) changed the cadmium adsorption behaviour, indicating that adsorption–desorption was a physical interaction on different surfaces. Most absorptions are pH-dependent, stable for Cadmium ions and vary for Lead ions. Moreover, the adsorption analysis using Langmuir and Freundlich isotherms showed no significant characteristics of chemical interaction of the ions with the surfaces as indicated by low R2 values (both around 0.5) for magnetite materials higher for cellulose materials of Langmuir and Freundlich isotherms. This study is beneficial for various fields, such as material science and environmental chemistry, which will play an essential role in the future.
The physicochemical and thermal properties of tetrabutylammonium bromide (TBA-Br) and tetrabutylammonium hexafluorophosphate (TBA-PF6), and their change with the addition of Al2O3, were investigated using infrared (IR) spectroscopy and by simultaneously conducting thermal thermogravimetric (TG) analysis and differential thermal analysis (DTA) to obtain the differential scanning calorimetry (DSC) thermogram. The change in the IR data is characterized by the growth of a large peak in the range of 3500 cm−1 and the reduction of peaks below 1000 cm−1 with the additive concentration. The decomposition temperature determined from the peak in the DTG curve is nearly constant for TBA-Br, and it decreases with the addition of Al2O3 for TBA-PF6, although it does not depend on the concentration of the additives. The DTA curve of ionic salts with the addition of Al2O3 shows additional peaks, which indicates a change in the sample’s temperature at disorder or phase transitions. The variation in the melting temperature with additive concentration is similar to that of decomposition temperature. The maximum heat of fusion value was approximately 67 kJ kg−1 for the doped TBA-Br and TBA-PF6 but was achieved at a different additive concentration. This is due to the additional disorder in the system induced by the dissolution of Al2O3.