31 January 2023 in Journal of Aerosol Science
23 August 2023 in Nanoscale Advances
Nanoparticles (NPs) mixed at the atomic scale have been synthesized by atmospheric-pressure spark ablation using pairs of Pd and Hf electrodes. Gravimetric analysis of the electrodes showed that the fraction of each material in the resulting mixed NPs can be varied from ca. 15–85 at% to 85–15 at% by employing different combinations of electrode polarities and thicknesses. These results were also qualitatively corroborated by microscopy and elemental analysis of the produced NPs. When using pairs of electrodes having the same diameter, the material from the one at negative polarity was represented at a substantially higher fraction in the mixed NPs regardless of whether a pair of thin or thick electrodes were employed. This can be attributed to the higher ablation rate of the electrodes at the negative polarity, as already known from earlier experiments. When using electrodes of different diameters, the fraction of the element from the thinner electrode was always higher. This is because thinner electrodes are ablated more effectively due to, at least in part, the increased importance of the associated heat losses compared to its thicker counterpart. In those cases, the polarity of the electrodes had a significantly smaller effect. Overall, our results demonstrate, for the first time, that spark ablation can be used to control atomic scale mixing and thus produce alloyed NPs with compositions that can be tuned to a good extent by simply using different combinations of electrode diameters and polarities. This expands the capabilities of the technique for producing mixed nanoparticle building blocks of well-defined composition that are highly desired for a wide range of applications.
9 November 2023 in Nanoscale
This work reports on a novel template-free technique for producing isolated 1D magnetic nanochains and nanowires directly onto substrates and device architectures by directed self-assembly of gas-phase-generated nanoparticles.
6 September 2023 in Nanoscale Advances
Tailored Pd–Cu nanoparticles by spark ablation with a broad compositional range. X-ray spectroscopy and electron microscopy were used to show dynamic synthesis, successful mixing, and insights for development of new catalysts.
17 April 2023 in Small Structures
In the last decades, the metal‐assisted growth approach of semiconductor nanowires (NWs) has shown its potential in controlling crystal properties, such as crystal structure, composition, and morphology. Recently, literature reports have shown successful semiconductor NW growth with multiphase seed particles under growth conditions. Exploring alternative metal seeds and the mechanisms for growing semiconductor NWs is an exciting research field aiming to improve the control over the crystal growth process. Herein, the gallium phosphide (GaP) NW growth using Cu as seed particles inside an environmental transmission electron microscope is studied. In particular, the transformations of the Cu‐rich seed particles during the nucleation and growth of GaP NWs are observed. The supply of a relatively high amount of Ga atoms by the precursor mixture led to a solid Cu‐rich seed particle core covered by a liquid phase. Different growth dynamics within the two‐phase seed particle resulted in local competition in NW growth. As a result, the GaP NW kinked into another growth direction by forming a new interface at the NW growth front. The generated results enable insights into fundamental processes occurring in the seed particle during growth, creating leverage points for controlling the NW morphology.