24 February 2015 in Applied Optics
We propose an image encryption system based on phase mask multiplexing and photon counting imaging (PCI) technique for multiple image authentications and digital hologram security. Multiple images to be authenticated are converted into phase-only images using a phase-retrieval algorithm in fractional Fourier transform domain. The multiple phase-only images are multiplexed into a single phase-only mask and it is further encrypted into a complex-valued function. The photon-limited image is generated by applying the PCI technique to a complex-valued function. For decryption, the photon-limited decrypted images are obtained after applying the appropriate keys. The photon-limited decrypted image contains sufficient information for verification because this image has sparse representation. To verify the photon-limited decrypted image, the optical correlation filters can be used. The proposed system has also been used for hologram security. For hologram security, the system provides multiple layers of security by hiding multiple encrypted images. The computer simulation results have been presented. The authentication scheme has been tested for securing three-dimensional information through experimentally recorded Fresnel digital hologram.
1 April 2025 in Bulletin of Electrical Engineering and Informatics
The need for nano-antennas with decreased size and the capacity to operate at mid-infrared frequencies to enable adequate coverage of signal is being investigated. In this paper, we present graphene-based nano-antenna and analysed at the resonating frequency 33 THz using gallium arsenide material as a substrate having dielectric constant 11.35 and a loss tangent of 5.6×10-4 for terahertz (THz) frequency. The height of substrate is optimized to 108 nm and in-plane dimension being 1,700×1,400 nm. Graphene was used as a rectangular patch with dimension 850×450×5 nm and ground having chemical potential=1.4 eV, and relaxation time=1 ps, to achieve high gain and bandwidth. Impact of slot width variation on the antenna parameters have been reported in terms of reflection coefficient (S11), voltage standing wave ratio (VSWR), radiation pattern and gain. Reported beam width being 90.4° for both electric and magnetic planes. Proposed antenna achieved a return loss of -18.38 dB, VSWR less than 2, indicating good match with load, highest gain of 8.8 dBi and bandwidth of 500 GHz at the target resonance frequency making it suitable for 5G/6G mm wave wireless communication.