16 July 2025 in IEEE Geoscience and Remote Sensing Magazine
The National Aeronautics and Space Administration (NASA) in the United States and the Indian Space Research Organisation (ISRO) have developed the NASA-ISRO Synthetic Aperture Radar (NISAR) mission, planned for launch in 2025. The mission will use SAR to map Earth’s solid surfaces every 12 days, persistently on ascending and descending portions of the orbit, over all land and ice. The mission’s primary objectives will be to study Earth’s land and ice deformation and ecosystems in areas of common interest to the U.S. and Indian science communities. This single observatory solution with L-band (24-cm wavelength) and S-band (9.4-cm wavelength) imaging radars has a swath of more than 240 km at 5–10-m resolution, using full polarimetry where needed. The data will be processed into a suite of products in radar-specific and geographic coordinates tailored to the needs of each science discipline. The product suite is designed to be analysis ready and will be freely and openly available. To achieve these unprecedented capabilities, both radars use a reflector-feed system whereby the feed aperture elements are individually sampled to allow a scan-on-receive capability at both the L band and S band. The project is preparing for launch at the integration and test facilities in India. The launch will take place at the Satish Dhawan Space Center in India on ISRO’s Geosynchronous Launch Vehicle (GSLV) Mark II. NISAR will be launched into a sun-synchronous polar orbit at a 748-km altitude with an exact 12-day repeat cycle. This article summarizes the mission, the science, the measurements, and plans for commissioning and early operations.
17 August 2021 in IEEE Transactions on Geoscience and Remote Sensing
A new dielectric constant estimation approach for the lunar surface using Mini-RF synthetic aperture radar (SAR) data and Chandrayaan-2 SAR data is presented in this work. Both the SAR systems are based on a hybrid-polarimetry (hybrid-pol) configuration that transmits a circularly polarized wave and coherently measures the backscattered wave by dual orthogonal linearly polarized channels. From the three-component hybrid-pol SAR decomposition technique, the ratio of the Fresnel reflection coefficients for horizontal and vertical polarization transmission can be estimated. This ratio, which is referred to as the co-polarization ratio, is used by the proposed methodology to find the real value of the dielectric constant. For performance validation, the proposed method is implemented on the Mini-RF hybrid-pol SAR data acquired over Apollo 17 landing sites. The values of the real part of dielectric constant are estimated for six different regions covering the collection sites of six Apollo 17 samples: 72 441, 73 241, 74 241, 75 081, 76 001, and 79 135. The results obtained using the proposed method are found to be in good agreement with the laboratory-measured results of the corresponding samples. Furthermore, the proposed methodology is also implemented on the Chandrayaan-2 hybrid-pol SAR data acquired over the Biot crater region. Various small areas possessing different possible surface characteristics, situated inside and outside the Biot crater , are being analyzed for validation.
23 April 2025 in IEEE Geoscience and Remote Sensing Magazine
BBBimal Kumar Bhattacharya
+21
India launched the C-band synthetic aperture radar (SAR) satellite Earth Observation Satellite (EOS)-4 on 14 February 2022. The payload, operating at 5.4 GHz, is a state-of-the-art sensor, and the improved data products give the user community a set of data that can address research as well as operational user requirements. A lot of applications have been made operational over the Indian region as well as Antarctica by the Indian science community. Here, we showcase the utilization of EOS-4 data related to various global applications, such as agriculture, forest, soil moisture (SM), hydrology, cryosphere, geoscience, oceanic, and coastal applications. Since the data are made globally available, the global user community can address its data needs from a SAR sensor, where full hybrid and dual polarizations are available from electronically steerable beams. At a 17-day revisit time, the satellite takes care of many applications that need closer observations. The satellite has capabilities to address almost all the requirements of the user community, with repeat-pass interferometry being introduced on an experimental basis.
29 January 2024 in International Journal of Remote Sensing