In this work we discuss various selected mission concepts addressing Venus evolution through time. More specifically, we address investigations and payload instrument concepts supporting scientific goals and open questions presented in the companion articles of this volume. Also included are their related investigations (observations & modeling) and discussion of which measurements and future data products are needed to better constrain Venus’ atmosphere, climate, surface, interior and habitability evolution through time. A new fleet of Venus missions has been selected, and new mission concepts will continue to be considered for future selections. Missions under development include radar-equipped ESA-led EnVision M5 orbiter mission (European Space Agency 2021), NASA-JPL’s VERITAS orbiter mission (Smrekar et al. 2022a), NASA-GSFC’s DAVINCI entry probe/flyby mission (Garvin et al. 2022a). The data acquired with the VERITAS, DAVINCI, and EnVision from the end of this decade will fundamentally improve our understanding of the planet’s long term history, current activity and evolutionary path. We further describe future mission concepts and measurements beyond the current framework of selected missions, as well as the synergies between these mission concepts, ground-based and space-based observatories and facilities, laboratory measurements, and future algorithmic or modeling activities that pave the way for the development of a Venus program that extends into the 2040s (Wilson et al. 2022).
9 November 2018 in IEEE Microwave and Wireless Components Letters
This letter reports a GaAs monolithic microwave integrated circuit (MMIC) low noise amplifier (LNA) with integrated high-power absorptive receive protection switch realized using 0.13-μm GaAs pHEMT process. On-the-chip current distributed, resonant shunt FET switch configuration is employed for higher power handling. FET stacking technique is used to reduce the effective noise figure (NF). A two-stage LNA with integrated high power switch, forming each arm in a balanced configuration is employed to realize a monolithic LNA with integrated absorptive receive protection switch. This novel MMIC provides protection up to 20-W continuous wave and 2.9-dB NF, a gain of 20 dB over 9.3-9.9 GHz.
8 October 2020 in IEEE Transactions on Microwave Theory and Techniques
Compact re-entrant cavities, widely used as microwave resonators, can be employed as high-performance sensors. A new approach is proposed here to calculate the resonance frequency, its sensitivity, and quality factor (Q-factor) of these cavities, having diverse taper shapes of the re-entrant post. The proposed closed-form expressions are based on the chain matrix approach for tapered coaxial transmission lines, and the calculated results for the resonance frequency and quality factor have been verified with full-wave electromagnetic simulations and experiments. The formulation is mathematically simple and accurate (<4%). Since a cavity with taper toward the gap-end is found to be more sensitive to gap variations, a robust, tunable re-entrant cavity resonator with a tapered post and an adjustable gap was fabricated. The performance of this cavity as a displacement sensor was evaluated by numerically calculating the deflection of a thin diaphragm from measured resonance frequencies using the expressions derived here. This design of the sensor is found to be immune to manufacturing tolerance in the re-entrant gap.
6 February 2023 in IEEE Transactions on Geoscience and Remote Sensing
An advanced Ku-band pencil-beam Scatterometer has been developed having a scanning 1.4m diameter Cassegrain antenna, for providing 3km x 20km (for HH beam) and 3km x 23km (for VV beam) fundamental range-slice resolution, a marked improvement over its predecessor Scatsat-1, which provided 6km x 46km (for HH beam) and 6km x 70km (for VV beam). This instrument will carry forward the legacy of data services from the Indian Space Research Organization’s OScat (Oceansat-2 Scatterometer, which operated in orbit from 2009 to 2014) and Scatsat-1, which operated from September 2016 to April 2021, with improved spatial resolution, noise-equivalent normalized radar cross-section (NEσ°) and the sensitivity parameter Kp. The improvement in NEσ° and in the Signal-to-Noise Ratio (SNR) is of the order of 4.5dB, and of Kp by 2.5dB over a Scatsat-1 equivalent resolution cell. Equivalently, over its own range-slice resolution, the new sensor will match Scatsat’s measurement sensitivity. This article elaborates on the system design of the instrument, the performance improvements over Scatsat-1 and the payload characterization methods.
24 February 2021 in IEEE Microwave and Wireless Components Letters
This paper illustrates the electrical and mechanical design, simulation and test results of a high power miniaturized beam steering network for SAR applications at X Band using a waveguide based 8X8 butler matrix. The unit has an insertion loss of better than 0.4dB and isolation better than 25dB over 600 MHz bandwidth at 9.6 GHz. The unit has been tested for power handling up to 500W average and peak power up to 6kW. The mechanical size has been contained under 478mm X 362mm X 264mm using a novel non-planar structural design.
23 April 2025 in IEEE Geoscience and Remote Sensing Magazine
India launched the C-band synthetic aperture radar (SAR) satellite Earth Observation Satellite (EOS)-4 on 14 February 2022. The payload, operating at 5.4 GHz, is a state-of-the-art sensor, and the improved data products give the user community a set of data that can address research as well as operational user requirements. A lot of applications have been made operational over the Indian region as well as Antarctica by the Indian science community. Here, we showcase the utilization of EOS-4 data related to various global applications, such as agriculture, forest, soil moisture (SM), hydrology, cryosphere, geoscience, oceanic, and coastal applications. Since the data are made globally available, the global user community can address its data needs from a SAR sensor, where full hybrid and dual polarizations are available from electronically steerable beams. At a 17-day revisit time, the satellite takes care of many applications that need closer observations. The satellite has capabilities to address almost all the requirements of the user community, with repeat-pass interferometry being introduced on an experimental basis.