17 February 2023 in Science Advances
The Dzyaloshinskii-Moriya interaction (DMI) is an antisymmetric exchange interaction that stabilizes spin chirality. One scientific and technological challenge is understanding and controlling the interaction between spin chirality and electric field. In this study, we investigate an unconventional electric field effect on interfacial DMI, skyrmion helicity, and skyrmion dynamics in a system with broken inversion symmetry. We design heterostructures with a 3d-5d atomic orbital interface to demonstrate the gate bias control of the DMI energy and thus transform the DMI between opposite chiralities. Furthermore, we use this voltage-controlled DMI (VCDMI) to manipulate the skyrmion spin texture. As a result, a type of intermediate skyrmion with a unique helicity is created, and its motion can be controlled and made to go straight. Our work shows the effective control of spin chirality, skyrmion helicity, and skyrmion dynamics by VCDMI. It promotes the emerging field of voltage-controlled chiral interactions and voltage-controlled skyrmionics.
6 January 2023 in IEEE Transactions on Electron Devices
Voltage-controlled (VC) spin-orbit-torque (SOT) magnetic random access memory (MRAM) is being considered as the next-generation magnetic memory with potential to achieve superior speed, power, and write error rates over existing MRAM technologies. By placing multiple VC devices on a single SOT bus, VC-SOT MRAM can also enable compact structures, in which multiple devices can be addressed individually yet programmed via a shared current. In this work, we propose two implementations of shared-current write: the horizontal shared current write (HSCW), which reduces the average SOT current per bit by the number of bits on the SOT bus, and the vertical shared current write (VSCW), which can further leverage data dependency for increased performance. We simulate the efficiency of the HSCW and VSCW using a Landau–Lifshitz–Gilbert (LLG)-based VC-SOT model and a 28-nm CMOS technology and show that HSCW and VSCW can achieve an energy saving of 74% and 40%–87%, respectively, in a 32-bit setting. Analysis of data patterns in common workloads finds that 40% of data share more than 85% common bits, for which VSCW can leverage for further improved performance.
21 May 2014 in Journal of Vacuum Science & Technology B
A careful investigation is made of the growth of Ir nanocrystals (NCs) on Al2O3 by atomic layer deposition (ALD), and a charge trapping memory device using ALD-grown Ir NCs as the charge trapping layer and ALD-grown Al2O3/HfO2 as the tunneling/blocking layers is fabricated. It is found that the ex situ nucleation of Ir NCs on ALD-grown Al2O3 is difficult, though in situ growth can produce pure metallic Ir NCs with a face-centered cubic crystalline phase directly on ALD-grown Al2O3 at the initial growth stage, which follows the nucleation incubation model. The growth of these metallic Ir NCs is attributed to the presence of a uniform coverage of reactive groups (hydroxyl or dimethylaluminum) on the as-deposited fresh ALD-grown Al2O3 surface, which greatly promotes the uniform nucleation of Ir. Electrical measurements of p-Si/Al2O3/Ir NCs/HfO2 memory cells exhibit a large memory window of 4.2 V at the sweeping gate voltage of ±10 V, and a ∼76% retention property after 104 s at 75 °C. Also, a stable memory window of ∼2 V is achieved during the first 105 program/erase cycles under a ±10 V/10 ms program/erase operation. In situ ALD-grown Ir NCs with the highest density of 0.6 × 1012/cm2 provide a potential approach to fabricate large-area high-density NCs for future ultrahigh-density nonvolatile NC memory applications.
30 September 2019 in IEEE Magnetics Letters
We propose an optimization principle for the operation of voltage-controlled magnetic tunneling junctions (VC-MTJs): optimization via magnetic torque, in contrast to the conventional optimization via magnetization. For memory applications, we minimize the magnetic torque at the end of the write pulse, while for stochastic applications, we attempt to find a balance between damping and precessional torque at the beginning of the pulse. We simulate the proposed method using a physics-based VC-MTJ model and show that, for memory applications, optimization for torque reduces ringing by 43% and improves pulse shape tolerance by a factor of 2.1, while for stochastic applications, it improves convergence time by 61% and energy by 37%.
11 March 2020 in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
Resistive nonvolatile memories (NVMs) promise significant performance improvement over existing NVM candidates. However, fabrication nonidealities and parasitics on the access path cause cell location-dependent variations in the total resistance received at the read circuitry. Write characteristics delivered to each cell, as well as the optimal write conditions for each cell, are also location-dependent. In this article, we propose a 2-D calibration scheme to address these variations. The proposed scheme joins row and column calibrations to create a correction grid at each crosspoint on the array and effectively cancels many spatial patterns. The enabling circuit and algorithmic modifications are described. We assess the 2-D calibration scheme in a 28-nm 256x 256 memory array, and show reduction in variability across multiple gradient patterns compared to conventional calibration methods. For the same calibration granularity, 2-D calibration achieves between 41% and 99% improvement depending on the amount of calibration bits. For the same amount of total calibration bits, the 2-D calibration scheme reduces the variability between 39% and 99%.
1 August 2026 in New Journal of Physics
We investigate spin quantum-fluctuation effects that originate from the Heisenberg uncertainty principle during the dynamical cycle of disentanglement, entanglement, and re-disentanglement between itinerant electrons and localized magnetic moments mediated by the s–d exchange interaction. Beyond conventional deterministic spin-transfer torque, we analyze an intrinsic mechanism that transfers spin quantum fluctuations to a nanomagnet. By extending the Landau–Lifshitz–Gilbert equation to incorporate both quantum and thermal stochastic fields, we identify a temperature regime in which quantum fluctuations dominate the magnetization dynamics. We further show that voltage-controlled magnetic anisotropy exponentially amplifies spin quantum fluctuations, enabling binary readout through magnetoresistance in magnetic tunnel junctions. These findings provide a microscopic framework for fluctuation-driven spin dynamics and outline a device-level pathway toward spin-based quantum true random number generation.