Saiful Islam

Saiful Islam

Auto-generated profile, based on publicly available information

Saiful Islam

Department of Electronic Engineering, Hanyang University, Seoul, South Korea

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 March 2021 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SISaiful Islam
Saiful Islam
MZMuhammad Zada
Muhammad Zada
HYHyoungsuk Yoo
Hyoungsuk Yoo
To maintain the compactness of future 5G smartphones, integration of sub-6 GHz and millimeter-wave (mm-wave) bands is a challenging task due to the large frequency ratio. We, therefore, propose a single-fed triple-band antenna with a large frequency ratio. The proposed antenna is composed of a microstrip patch radiator with an inverted U-shaped slot for dual-band operation in the mm-wave frequencies (28 and 38 GHz). A meandered radiating structure is linked to the microstrip patch radiator through a compact microstrip resonant cell (CMRC) low-pass filter (LPF), which is used for the integration of these structures to be operated at 3.5 GHz. A compact size of 22 mm ×10 mm ×0.508 mm for the proposed antenna was realized by incorporating the radiator slot, an LPF, the truncated ground, and a meandered line structure. Wide, decoupled -10 dB bandwidths of 12.9%, 5.8%, and 2.4% at 3.5, 28, and 38 GHz, respectively, were realized for the proposed MIMO antenna without utilizing an external decoupling structure. A detailed safety study with respect to specific absorption rates and power densities was analyzed in data, reading, and talking modes. Finally, the measurements were performed in an anechoic chamber, and the measured results were in a good correlation with the simulation results.

30 September 2022 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SISaiful Islam
Saiful Islam
MZMuhammad Zada
Muhammad Zada
HYHyoungsuk Yoo
Hyoungsuk Yoo
In this paper, a dual-band integrated compact phased-antenna array is proposed for fifth generation smartphone communication. The proposed single-layered substrate-based antenna array has a dual band, wideband, high gain, and wide beam steering function. The dual bands were achieved by passive integration of meandered lines and a microstrip patch antenna using a dual-stub-based filter. Owing to the small size of the antenna array (56.65 mm × 4.95 mm × 0.508 mm), it was installed on both the top and side metal frames of a smartphone in a vertical position, allowing a wide beam coverage with a high gain. The proposed antenna provided the –6 dB bandwidths of 250 MHz and 3520 MHz at 3.5 and 28 GHz, and the –10 dB bandwidths of 110 MHz and 1890 MHz were observed at 3.5 and 28 GHz, respectively. The radiation performance with a smartphone model and a hand phantom were analyzed in detail. Furthermore, a safety study on the power density and specific absorption rate of the arrays with frequency-dependent hand and head models was conducted. Finally, we fabricated an antenna array prototype, and compared the measured results with the simulation results, which showed a good agreement.

15 June 2023 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SISaiful Islam
Saiful Islam
MZMuhammad Zada
Muhammad Zada
HYHyoungsuk Yoo
Hyoungsuk Yoo
The spatial coverage of a 5G smartphone antenna array is an important factor to consider in the design and implementation of 5G wireless communication systems. In this paper, we present a compact, low-profile, and reconfigurable radiation pattern mm-wave smartphone antenna array that can provide high spatial coverage through its hybrid structure and beam-scanning capabilities. The proposed antenna array introduces PIN diode-controlled strips that enable beam tilting of (±)50° in the vertical direction with respect to a smartphone. In addition, the antenna array can beam scan (±)45° while maintaining a gain of >5 dBi. The compact antenna array measures 28 mm × 5.5 mm × 0.508 mm, including the director and reflector, which are situated next to the antenna. The array exhibited a wide –6 dB impedance bandwidth of 3480 MHz (26.42–29.90 GHz) and >25 dB of isolation in the simulation environment. The on/off state of the diode results in three operating modes of the antenna array: (a) broadside -x, (b) broadside, and (c) broadside +x modes. The radiation performance of the antenna array was analyzed in each operating mode, with and without a smartphone present. Additionally, power density analysis was performed for safety analysis using a frequency–dependent homogeneous hand and head model while the antenna array was installed in a smartphone model. Finally, an antenna array was fabricated, and the measurement results were verified, showing good agreement with the simulated results.

2 April 2024 in IEEE Internet of Things Journal
Verified
Journal Article
Closed access
SISaiful Islam
Saiful Islam
MZMuhammad Zada
Muhammad Zada
UIUsman Rizqi Iman
Usman Rizqi Iman
HYHyoungsuk Yoo
Hyoungsuk Yoo
We introduced a circularly arranged Vivaldi endfire antenna array combined with nona-band rectifiers to enhance the capability of receiving electromagnetic power to supply power for Internet of Things (IoT) devices. The rectifier encompasses frequencies of 0.9, 1.4, 1.8, 2.1, 2.4, 2.6, 3.5, 4.9, and 5.8 GHz, primarily covering telecom and Wi-Fi operating frequencies. Higher efficiency values at a lower input power of -10 dBm were achieved as 73.98%, 54.54%, 63.16%, 27.14%, 59.58%, 56.60%, 46.62%, 21.43, and 20.64% at 0.9, 1.4, 1.8, 2.1, 2.4, 2.6, 3.5, 4.9, and 5.8 GHz, respectively. In addition to the rectifier, we designed a wideband endfire Vivaldi antenna with a 3–8 dB gain over the operating frequencies, with an efficiency exceeding 80%. To further boost the received power, the antenna rectifier was transformed into an eight-element-based circular array, enabling multibeam and full-azimuth power reception coverage. We validated the performance of the rectifier and antenna by fabricating an energy-harvester array. Furthermore, we demonstrate the IoT device operation to illustrate the practical application of our proposed system.

12 March 2024 in IEEE Access
Verified
Journal Article
Open access
AKAyesha Kazmi
Ayesha Kazmi
MZMuhammad Zada
Muhammad Zada
SISaiful Islam
Saiful Islam
HYHyoungsuk Yoo
Hyoungsuk Yoo
In response to the increasing demands for 4G LTE and 5G smartphone applications, this study presents a compact and integrated prototype designed to cover sub-6 GHz and 5G mm-wave bands with high-frequency ratios. The proposed integrated design incorporates two multiple-input-multiple-output (MIMO) configurations: a 2 × 2 dual-band planar inverted-F antenna (PIFA) MIMO for sub-6 GHz and an array of eight elements for mm-wave. Proximity placement (2.5 mm separation) of mm-wave elements on smartphone RIM achieves compact array size with optimal beamforming, coverage, and interference prevention. Utilizing a meandered patch and truncated ground, the proposed PIFA achieves a size of 37 mm × 7 mm × 0.508 mm with a Rogers RT/Duroid 5880 substrate. Effective operation is demonstrated in sub-6 GHz bands (5G at 3.8 GHz, LTE band-46 at 5.4 GHz), complying with safety standards (specific absorption rate and power density) set by the Institute of Electrical and Electronics Engineers and the International Commission on Non-Ionizing Radiation Protection. Efficient performance extends to the 5G mm-wave band at 28 GHz, making it a promising choice for modern smartphone applications.

5 November 2024 in IEEE Access
Verified
Journal Article
Open access
Ali SufyanAli Sufyan
Ali Sufyan
Syed Ahson Ali ShahSyed Ahson Ali Shah
Syed Ahson Ali Shah
KKKhan Bahadar Khan
Khan Bahadar Khan
ISIzaz Ali Shah
Izaz Ali Shah
AUArif Ullah
Arif Ullah
HYHyoungsuk Yoo
Hyoungsuk Yoo
This study examines a single-fed, self-isolated, dual-band, 8-element multiple-input multiple-output (MIMO) antenna system for fifth-generation (5G) and beyond-5G (B5G) handsets. The proposed antenna is designed by an innovative composition of two F-shaped slots backed by a slotted ground plane, enabling a dual-band operation in the sub-6 GHz (4.7 to 4.9 GHz, n79) and millimeter wave (mmWave) (28 to 29 GHz, n257) frequency bands. High isolation of >14.4 dB and >25 dB and a high diversity gain of >9.9 dB were achieved at the respective frequency bands without using additional decoupling techniques, exhibiting an efficiency of approximately 90% with high gains of 4.9 and 7.2 dBi at the n79 and n257 bands, respectively. The antenna demonstrates excellent MIMO performance regarding very low envelope correlation coefficient (<0.001), total active reflection coefficients (<10 dB and -24 dB), and mean effective gain (< -7.3 dB and -7 dB). In addition to the safety evaluations, the performance is verified in a realistic mobile device to ensure practical feasibility. The evaluations showed promising results, demonstrating that the proposed design is a suitable, compact, and highly effective MIMO solution for 5G and B5G handsets.