Tiku Yu

Tiku Yu

Auto-generated profile, based on publicly available information

Tiku Yu

Department of Communication Engineering, National Taipei University, New Taipei City, Taiwan

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2022 in IEEE Access
Verified
Journal Article
Open access
Bor-Shing LinBor-Shing Lin
Bor-Shing Lin
TYTiku Yu
Tiku Yu
志維 彭志維 彭
志維 彭
CLChueh-Ho Lin
Chueh-Ho Lin
HHHung-Kai Hsu
Hung-Kai Hsu
ZZZhao Zhang
Zhao Zhang
Falls are the second leading cause of death from unintentional injuries in older adults. Although many systems have been used to detect falls, they are limited by the computational complexity of the algorithm. The images taken by the camera must be transmitted through a network to the back-end server for calculation. As the demand for Internet of Things increases, this architecture faces such problems as high bandwidth costs and server computing overload. Emerging methods reduce the workload of servers by transferring certain computing tasks from cloud servers to edge computing platforms. To this end, this study developed a fall detection system based on neuromorphic computing hardware, which streamlines and transplants the neural network model of the back-end computer to the edge computing platform. Through the neural network model with integer 8 bit precision deployed on the edge computing platform, the object photos obtained by the camera are converted into human motion features, and a support vector machine is then used for classification. After experimental evaluation, an accuracy of 96% was reached, the detection speed of the overall system was 11.5 frames per second, and the power consumption was 0.3 W. This system can monitor the fall events of older adults in real time and over a long period. All data were calculated on the edge computing platform. The system only reports fall events via Wi-Fi, thereby protecting the privacy of the user.

7 February 2018 in IEEE Transactions on Microwave Theory and Techniques
Verified
Journal Article
Closed access
TYTiku Yu
Tiku Yu
This paper proposes a topology of a broadband Wilkinson power divider based on the segmented structure. The segmented structure is formed by many transmission line segments in shunt with grounded capacitors and series resistor-capacitor networks. Each transmission line segment has the length of a fraction of a quarter of the wavelength (or λ/4) and the summed length of all segments remains λ/4. The segmented structure resembles a multiorder matching network and can extend the operation bandwidth through concurrent matching at multiple frequencies. Theoretically, the operation bandwidth can keep increasing with the increased number of segments. Practically, the widest achievable bandwidth is limited by the implementable component values. The theoretical background of the proposed broadband topology is explained. The guideline of designing the proposed power divider is provided. A power divider prototype with the structure of three segments is designed and fabricated. The measurement results, matching the simulations, show the state-of-the-art -20-dB operation bandwidth of 101%, if compared with all the published Wilkinson power dividers having a total length of λ/4.

16 February 2018 in IEEE Microwave and Wireless Components Letters
Verified
Journal Article
Closed access
TYTiku Yu
Tiku Yu
Jeng-Han TsaiJeng-Han Tsai
Jeng-Han Tsai
YCYenwei Chang
Yenwei Chang
A radial multiway power divider is used to distribute microwave signals to the next stages located radially around all directions. It has been a challenging task to implement a radial multiway power divider on a planar circuit board without sacrificing the bandwidth performance. In this letter, a radial four-way power divider with the proposed isolation network is presented. The isolation network, composed of several combined RLC and LC networks, plays the crucial role of making the radial layout style easy to realize, and meanwhile improves the output matching and port-to-port isolation. The background principle of the proposed topology and the guideline of designing the isolation network are provided. The fabricated radial four-way power divider results in the measured -20-dB output matching and isolation bandwidths as large as 35% and 65%, respectively, exhibiting the best bandwidth performance among all the published radial power dividers of the same type.

1 November 2017 in Electronics Letters
Verified
Journal Article
Open access
PDF file
TYT. Yu
T. Yu
BLB.‐S. Lin
B.‐S. Lin
YCY. Chang
Y. Chang
A radial power splitter is used to distribute signal power to the following stages locating radially around all directions. A well‐known disadvantage of a radial power splitter implemented on a planar circuit board is the poor performance in output matching and output port isolation. An eight‐way radial power splitter including the proposed ring‐shape isolation network is presented. The ring‐shape isolation network, comprising several series high‐impedance lines and capacitors, plays the crucial role of significantly improving output matching and isolation of the eight‐way power splitter. The background principle and design of the ring‐shape isolation network are described. An eight‐way radial power splitter is designed, simulated and fabricated on a printed circuit board. The measurement results, decently matching the simulations, show the input and output reflection coefficients as low as –20 dB at 1 GHz. The measured output isolation coefficients are below –20 dB at 0.7–1.14 GHz between any two output ports, exhibiting the widest isolation bandwidth among the reported radial power splitters.

22 March 2018 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
TYTiku Yu
Tiku Yu
JTJeng‐Han Tsai
Jeng‐Han Tsai
This study proposes a method of designing a multiway power divider including all connecting lines. The multiway power divider is based on several interconnected two‐way power dividers. The connecting lines comprise the interconnecting sections, used for interconnecting the two‐way power dividers, and the input/output extension lines, used for connecting the internal circuit to the on‐board feeding ports. In the proposed method, the length of each interconnecting section can be flexibly partitioned to best fit the layout requirement. Every transmission line used for any purpose of connection in the layout is included as part of design and contributes to improvement of matching bandwidths. Therefore, a multiway power divider adopting the design method will result in better bandwidth performance for the same circuit size. The background principle of the proposed method and several simulated design scenarios are provided. A prototype of a four‐way power divider is designed and fabricated. The measurement results, decently matching the simulations, validate the proposed idea. This study for the first time discusses on design and optimisation of an entire multiway power divider including all portions of connecting lines. The proposed method can make a multiway power divider achieving an improved bandwidth and more efficient layout.

9 March 2018 in IEEE Access
Verified
Journal Article
Open access
TYTiku Yu
Tiku Yu
A conventional multiway Wilkinson power divider must include transmission lines with a quarter of the wavelength. The prior miniaturized versions can further shorten the quarter-wave lines by adopting synthesized transmission lines, but the resulted shrunk operation bandwidth has not been considered as part of design. This paper introduces a method of designing the proposed length-saving multiway power divider to achieve targeted bandwidth performance with the minimum required total length. The proposed multiway power divider, including transmission lines with flexible lengths and additional matching capacitors, has the adjustable total length that can be set to the optimum value according to the generated plot mapping the corresponding bandwidths to the selected total lengths. The background principle, the theoretical analyses, and the design procedure of the proposed idea are addressed in detail. The design examples of the four-way, eight-way and 32-way power dividers are provided. A 1 GHz eight-way power divider prototype based on the proposed design method is fabricated. The measurements, decently matching with simulations and the theoretical prediction, show an expected 51% operation bandwidth with the total length reduced to 72% of the conventional value.