7 April 2026 in Advanced Science
Bidirectional haptic systems demand interfaces that combine sensing and actuation, enabling concurrent detection of tactile inputs and delivery of perceptually rich feedback across a broad frequency spectrum. However, most existing haptic technologies remain limited to simple tactile sensing or narrowband feedback, struggling to resolve continuous motions and simultaneous sensory cues required for naturalistic human‐machine interaction (HMI). These limitations fundamentally constrain the fidelity and expressiveness of tactile communication, preventing current human–machine interfaces from reproducing the broadband of sensations perceived by human skin. Here, we present a large‐area bidirectional human–machine interface (HMI) that utilizes a unified haptic dual‐resonant actuator (UHDRA) capable of simultaneously implementing electrostatic‐based multimodal tactile sensing and actuation. The system provides spatially uniform tactile stimulation over a broad frequency range of 20–250 Hz while simultaneously enabling real‐time detection without interference from actuator‐induced vibration. Leveraging the actuator's intrinsic structural stiffness, the interface maintains stable vibration amplitudes into the gentle‐touch regime (≈2 N) while selectively modulating frequency, allowing clear discrimination of diverse tactile stimuli without perceptual discontinuity. Building on this decoupled bidirectional interaction capability, the proposed approach offers transformative potential for next‐generation applications such as bidirectional telerobotic and augmented interactions.
15 November 2026 in Advanced Science
Deterministic placement of fragile microcomponents is a central challenge in advanced electronic manufacturing, including chiplet integration and micro‐LED assembly. Most switchable adhesives rely on contact‐mediated detachment, which concentrates stress at the perimeter and causes slip and misalignment. Here, we report a diving beetle‐inspired electroactive switchable adhesive (DESA) that achieves deterministic transfer through vibration‐driven noncontact release enabled by interfacial stress reconfiguration. A perforated electrode couples a bioinspired adhesive layer to an electroactive PVC gel actuator, defining electrically contracting electrode‐contact regions and mechanically linked gel‐continuous hole regions. Under actuation, differential displacement between these regions deforms the adhesive layer and promotes partial peel‐off at distributed interior sites rather than along a single perimeter front. At the 269 Hz resonance, vibration amplifies the displacement mismatch and spreads peel‐off across the contact area, progressively reducing the load‐bearing area. The resulting inertial stress completes noncontact separation, suppressing misalignment. The adhesive layer provides > 20 kPa dry and > 42 kPa wet adhesion across diverse substrates and retains stable performance over 1000 attachment–detachment cycles. On a robotic platform, the device transfers microcomponents with a lateral placement error of 318 ± 155 µm (≈99.5% placement accuracy). This interfacial stress reconfiguration offers a route to deterministic placement beyond adhesion‐strength control.