Centre Commun de Caractérisation des Matériaux des Antilles et de la Guyane (C3MAG), Université des Antilles et de la Guyane, Faculté des Sciences Exactes et Naturelles, BP 250, 97157 Pointe à Pitre Cédex, France
Auto-generated profile, based on publicly available information
Yves Bercion
Centre Commun de Caractérisation des Matériaux des Antilles et de la Guyane (C3MAG), Université des Antilles et de la Guyane, Faculté des Sciences Exactes et Naturelles, BP 250, 97157 Pointe à Pitre Cédex, France
Absolute quantitative data from atomic force microscopy (AFM)/lateral force microscopy experiments are always difficult to obtain mainly due to the need of the normal force and the friction force calibration. In this article, we developed an experimental method which allows us to extract absolute quantitative friction data without calibrating any force when the relation between and is linear or only calibrating the normal force when the relationship is nonlinear. The technique reported here, is suitable for an atomic force microscope that has the cantilever attached to the piezotube translator and an unguided incident laser beam on the cantilever. We take advantage of the piezotube bending during a large scan (5 μm×5 μm), generally considered as an undesirable effect, to calculate a detection factor that allows the determination of quantitative tribological data. The validity of our experimental method is checked on the extensively AFM studied materials, such as muscovite, silicon, and highly oriented pyrolytic graphite. The experiments are carried out in a load range where the shear stress τ can be expressed as where μ is the friction coefficient, P is the mean contact pressure, and is a parameter related to the tip/sample adhesion. The value of μ is found to be independent of the tip geometry and the pull-off force, and always constant for a given tip/sample couple in the load range investigated.