Dielectric materials with good thermal transport performance and desirable dielectric properties have significant potential to address the critical challenges of heat dissipation for microelectronic devices and power equipment under high electric field. This work reported the role of synergistic effect and interface on through-plane thermal conductivity and dielectric properties by intercalating the hybrid fillers of the alumina and boron nitride nanosheets (BNNs) into epoxy resin. For instance, epoxy composite with hybrid fillers at a relatively low loading shows an increase of around 3 times in through-plane thermal conductivity and maintains a close dielectric breakdown strength compared to pure epoxy. Meanwhile, the epoxy composite shows extremely low dielectric loss of 0.0024 at room temperature and 0.022 at 100 ℃ and 10−1 Hz. And covalent bonding and hydrogen-bond interaction models were presented for analyzing the thermal conductivity and dielectric properties.
This Review summarized the latest progress in structural engineering, material fabrication and enhancement of the electrochemical performances of micro/nanostructured TiNb2O7 and its analogues for high-performance energy storage systems.
A brief review on the pseudocapacitive storage and rate performance from the perspective of AZIB cathode materials. At last, an outlook is presented to promote the further development of AZIB cathodes.
Development of polymer-based composites with simultaneously high thermal conductivity and breakdown strength has attracted considerable attention owing to their important applications in both electronic and electric industries. In this work, boron nitride (BN) nanofibers (BNNF) are successfully prepared as fillers, which are used for epoxy composites. In addition, the BNNF in epoxy composites are aligned by using a film casting method. The composites show enhanced thermal conductivity and dielectric breakdown strength. For instance, after doping with BNNF of 2 wt%, the thermal conductivity of composites increased by 36.4% in comparison with that of the epoxy matrix. Meanwhile, the breakdown strength of the composite with 1 wt% BNNF is 122.9 kV/mm, which increased by 6.8% more than that of neat epoxy (115.1 kV/mm). Moreover, the composites have maintained a low dielectric constant and alternating current conductivity among the range of full frequency, and show a higher thermal decomposition temperature and glass-transition temperature. The composites with aligning BNNF have wide application prospects in electronic packaging material and printed circuit boards.