Department of Electronics and Electrical Engineering, Faculty of Science and Technology, Keio University, 3-14-1, Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan
Auto-generated profile, based on publicly available information
Nurul Ashikin Binti Daud
Department of Electronics and Electrical Engineering, Faculty of Science and Technology, Keio University, 3-14-1, Hiyoshi, Kohoku-ku, Yokohama 223-8522, Japan
We demonstrate ultrasmall demultiplexers based on photolithographic photonic crystals. The footprint of the demultiplexers is 110 μm2 per channel. Our in-plane demultiplexers are clad with silica, which makes them stable and easy to integrate with other silicon photonic devices. We describe two types of demultiplexers with spacings of 136 and 267 GHz between channels for application to dense wavelength division multiplexing. Integrated titanium nitride heaters allow us to precisely control the channel wavelength. We report a 2.5 Gbps transmittance experiment with sufficiently small crosstalk and discuss ways of achieving even lower crosstalk between channels.
We fabricate and demonstrate an electro-optic modulator that utilizes the randomness in a photonic crystal waveguide. We exploit a way of using random photonic crystals for device application that involves restricting the area influenced by the randomness. Our random photonic crystal waveguide is in a diffusive regime and the confinement of light is observed only for a W0.98 waveguide (98% of the original width) placed between W1.05 photonic crystal waveguides, where we obtained a transmittance spectrum with an ultra-high Q of 2.4 × 105. A numerical investigation revealed that the experimental yield rate of the appearance of the high-Q confined mode is larger than 80%, by properly designing the length of W0.98. Since the confinement location is predictable, we integrate a p-i-n structure and demonstrate a GHz electro-optic modulation.
1 January 2017 in IEICE Transactions on Electronics
We demonstrate a demultiplexer with a small footprint, dense spacing and tunability obtained using a photolithographic photonic crystal. Eight-port demultiplexing with a 267 GHz spacing is demonstrated with high wavelength tunability.
We fabricated a SiO2-clad all-silicon high-Q integration of p-i-n diode with photonic crystal nanocavity to demonstrate channel selective photoreceiver operation at a speed of 0.1 Gbs-1 for telecom wavelength light. This SiO2-clad device is photolithographically fabricated with a fabrication method compatible with that used for a complementary metal-oxide semiconductor, and the structure allows future mass production. The dark current is as small as 37.6 pA, which is possible because of the all-silicon structure clad with SiO2. As a result of the low noise, the minimum detectable optical power is −20 dBm, while the footprint of this integrated device is a very small 50 μm2. The characteristics of this device may allow us to use it as a compact monitoring device for optical networks.
We describe the fabrication and a demonstration of passive and active photonic crystal nanocavity devices, namely an electro-optic modulator, an all-silicon photodetector and a DeMUX filter. This is the first demonstration of active and passive photonic crystal nanocavity devices fabricated with a photolithographic process that may lead to future mass production.