1 May 2023 in Indonesian Journal of Electrical Engineering and Computer Science
Indoor positioning has become popular in this decade and is used to locate users or objects in indoor environments. This is because global positioning system (GPS) is not efficient for indoor use due to the multipath fading effect. This research is about development bluetooth low energy (BLE) indoor positioning system with the aid of long range (LoRa) network and guideline on selection of the BLE beacons. Next, positioning systems are developed consisting of BLE beacons, a transceiver of hybrid BLE-LoRa module, a LoRa receiver and Raspberry Pi as real-time monitoring. The received signal strength indicator (RSSI) and BLE Mac address from BLE beacons received via LoRa network are analyzed using the positioning algorithm designed in MATLAB. The positioning algorithm incorporates distance estimation, filter implementation and trilateration technique. The estimated location is analyzed with the root mean square error (RMSE) and cumulative distribution function (CDF). According to the results, implementing the filter reduces the positioning accuracy error, achieving 90% accuracy of positioning error less than 1.20 meters for the whole testbed. Finally, the algorithm is embedded into Raspberry Pi to view the location via desktop.
11 October 2024 in Journal of Advanced Research in Applied Sciences and Engineering Technology
In recent years, advancements in technology have reshaped the landscape of agricultural practices, aiming to address the challenges posed by conventional farming methods such as traditional hydroponic system. Traditional hydroponic systems often rely on conventional energy sources, leading to elevated energy consumption and carbon emissions. Addressing these challenges, the primary objective of this study is to design, implement, and evaluate an integrated hydroponic system that leverages IoT-based real-time monitoring and control, optimized solar energy utilization, and an electricity-saving box. IoT-enabled sensors and actuators monitor key parameters, facilitating automated adjustments to nutrient delivery, temperature, and humidity. Enhanced solar energy capture is achieved through advanced photovoltaic technologies, while the electricity-saving box ensures efficient power management. The findings demonstrate a substantial reduction in energy consumption compared to traditional hydroponic systems. The integrated approach contributes to minimized carbon emissions and resource utilization, aligning with eco-friendly cultivation practices. Real-time monitoring and control capabilities empower growers to optimize cultivation conditions for enhanced plant health and growth. In conclusion, this research underscores the potential of merging IoT technology, enhanced solar energy, and an electricity-saving box to transition hydroponic systems into sustainable and environmentally responsible platforms with the 35% of system efficiency enhancement achieved through the proposed method bring about transformative implications for automated hydroponic systems
3 April 2024 in Journal of Advanced Research in Applied Sciences and Engineering Technology
NRNurul Fazleen Abdul Rahim
Nurul Fazleen Abdul Rahim
+1
Vehicles on the road create a VANET network using IEEE 802.11P for wireless data exchange. However, VANET is challenging since the characteristics of VANET such as high mobility and frequent topology making it harder to design an effective routing protocol. The needs of an efficient performance routing protocol are crucial since it is to ensure a better network Quality of Service (QoS). In this paper, the evaluation of the IEEE 802.11P performance is simulated in real-world scenario using the Melaka City roadmap. In an urban setting, the impact of vehicle density on the performance of VANET routing protocols including OLSR, AODV, and DSDV are examined. Reviewing the effectiveness of the current VANET routing protocols is the goal of this research since it is crucial to know which routing has high performance under specific circumstances. Quantitative measurements including Packet Delivery Ratio (PDR), Packet Loss Ratio (PLR), and end-to-end delay are evaluated using the Network Simulator NS-3 and SUMO. Findings from the investigation show that while proactive routing protocols like OLSR and DSDV perform better in terms of end-to-end delay, AODV performs exceptionally well in terms of PDR and PLR.
15 November 2023 in International Journal of Interactive Mobile Technologies (iJIM)
The current reliance on single-path communication presents limitations for effectively monitoring and controlling critical parameters that are essential for hydroponic success. This hampers the achievement of optimal plant growth and overall system performance in multi-farming hydroponic setups. The issue lies in the inherent vulnerabilities of single-path communication, which can result in data loss and transmission errors. Therefore, reliable multi-path communication is essential for Internet of Things (IoT)-based automated monitoring systems. The research aims to enhance monitoring and control capabilities in multi-farming hydroponic environments by integrating advanced communication technologies. Utilizing the ESP microcontroller in conjunction with the Painless Mesh library enables seamless communication among nodes, facilitating real-time data exchange and control. Additionally, app-based dashboard monitoring offers a user-friendly interface for remote monitoring. The findings demonstrate that reliable multi-path communication, combined with app-based dashboard monitoring, promotes optimal plant growth, efficient resource allocation, and sustainable multi-farming practices. In summary, this research contributes to a deliberate efficiency increase of 30% in pH level, 25% in humidity level, and 35% in temperature level. This paves the way for adopting efficient multi-farming hydroponic solutions that are based on resource-efficient energy usage.
1 August 2020 in Indonesian Journal of Electrical Engineering and Computer Science
JGJohar Akbar Mohamat Gani
+2
In this paper, an alternative improvement is proposed which is the adaptive wireless access networks-based optical backhaul convergence that will greatly promote to use the existing resource of MANET (mobile ad hoc network). However, these characteristics itself acts as a drawback to the MANET applications such as the random distribution of nodes and continuously changing topology. MiNiTab statistical software was used to model the effect of the parameter variation to predict the field quality through the design of experiments while OMNeT++ network simulation was created to visualize the effect of QoS performance study in response with varying speed scenario. The result shows that the proposed ESCMDR scheme can obtain robustness and outperformed compared to the non-Taguchi previous study when it is used in random waypoint mobility model in any speed of sources. The work is based on Packet Delivery Ratio (PDR) and Packet Loss Probability (PLP) metric under the varying speed scenario. It results in better QoS network PDR of 28.9% improvement, with 83.56% improvement on average PLP. The paper shows that the MANET QoS performance constrained can be addressed with the self-configured data rate of integrated optimization with Taguchi method on AODV-UU (Adhoc On Demand Distance Vector-Uppsala University) routing technique.