15 May 2020 in Journal of Vibration and Control
Single and double inverted pendulum systems subjected to delayed state feedback are analyzed in terms of stabilizability. The maximum (critical) delay that allows a stable closed-loop system is determined via the multiplicity-induced-dominancy property of the characteristic roots, that is the dominant (rightmost) roots are associated with higher multiplicity under certain conditions of the system parameters. Other methods such as tracking the changes of the D-curves with increasing delay and the Walton–Marshall method are also demonstrated for the example of the single pendulum. For the double inverted pendulum subjected to full state feedback, the number of control gains is four, and application of numerical methods requires therefore high computational effort (i.e. optimization in a four-dimensional space). It is shown that, with the multiplicity-induced-dominancy–based approach, the critical delay and the associated control gains can be determined directly using the characteristic equation and its derivatives.
31 March 2021 in Journal of The Royal Society Interface
The relation between balancing performance and reaction time is investigated for human subjects balancing on rolling balance board of adjustable physical parameters: adjustable rolling radius R and adjustable board elevation h . A well-defined measure of balancing performance is whether a subject can or cannot balance on balance board with a given geometry ( R , h ). The balancing ability is linked to the stabilizability of the underlying two-degree-of-freedom mechanical model subject to a delayed proportional–derivative feedback control. Although different sensory perceptions involve different reaction times at different hierarchical feedback loops, their effect is modelled as a single lumped reaction time delay. Stabilizability is investigated in terms of the time delay in the mechanical model: if the delay is larger than a critical value (critical delay), then no stabilizing feedback control exists. Series of balancing trials by 15 human subjects show that it is more difficult to balance on balance board configuration associated with smaller critical delay, than on balance boards associated with larger critical delay. Experiments verify the feature of the mechanical model that a change in the rolling radius R results in larger change in the difficulty of the task than the same change in the board elevation h does. The rolling balance board characterized by the two well-defined parameters R and h can therefore be a useful device to assess human balancing skill and to estimate the corresponding lumped reaction time delay.
29 August 2018 in IFAC-PapersOnLine
7 May 2022 in Journal of Biomechanics
The relation between balancing performance on rolling balance board and reaction time is investigated. Ten young healthy adults performed balancing trials on a rolling balance board with different wheel radius R and stance widths d in the frontal plane. A 2- and a 3-degree-of-freedom models subject to delayed state feedback with a single lumped reaction delay were created in order to describe hip and hip-lumbar strategies. The critical delays of the underlying models, for which state feedback stabilization is still possible, were determined. This critical delay is a good measure of the difficulty of the balancing task: the smaller the critical delay, the more difficult the balancing task. Subjects' response time to visual stimuli correlates with the critical delay of the models, therefore, it can be used as an indirect indicator for balancing skill. Hip-lumbar strategy was found to be superior to pure hip strategy in the sense that it allows larger reaction delay. Overall, rolling balance board is a simple and convenient tool to assess human's balancing skill. The difficulty of the task can be tuned by employing different wheel radius with different stance widths while it can be measured by a single number: the critical delay of the underlying model. Improvement in balancing skill therefore can easily be monitored during balance therapy and physical rehabilitation.
23 October 2018 in Acta Polytechnica CTU Proceedings
A two-degree-of-freedom mechanical model was developed to analyze human balancing on rolling balance board in the frontal plane. The human nervous system is modeled as a proportionalderivative controller with constant feedback delay. The radius R of the wheels and the board distance h measured from the center of the wheel are adjustable parameters. Simulation results using the mechanical model were compared with real balancing trials recorded by an OptiTrack motion capture system. The goal of the paper is to investigate whether the two-degree-of-freedom model is accurate enough to model the balancing task and to introduce a stabilometry parameter in order to characterize balancing skill in case of different set of R and h. The conclusion is that the angle of the upper body and the angle of the head also play an important role in the balancing process therefore a three- or four-degree-of-freedom model is more appropriate.