To overcome the rapid deactivation of conventional ZSM-5, novel nanosheet MFI zeolites, with different Si/Al molar ratios were well fabricated. It was found that Si/Al molar ratios, do not just affect acid properties, but also determine the morphologies of nanosheet MFI zeolites by changing a-c plane areas of zeolite nanosheets. In reaction of gas phase glycerol dehydration to acrolein, the nanosheet MFI zeolites were much more active and stable than conventional ZSM-5 catalysts, owing to their suitable acidity and unique nanosheet structure. For nanosheet MFI zeolite, with Si/Al = 50 (NMZ-50), the conversion of glycerol is higher than 99% in the initial 12 h, with an acrolein selectivity of 86.6%, better than most previous reports. This superior stability of NMZ-50 can be ascribed to its low coke deposition rate and improved coke tolerance capacity. Additionally, it is interesting to find that Al contents do not just simply affect acid properties, but also determine morphologies of nanosheet MFI zeolites, and thus influence catalytic performance.
8 November 2022 in Industrial & Engineering Chemistry Research
The in situ formed Cu+ species serve as active sites in the ethynylation of formaldehyde. The key problem that needs to be solved in this process is how to avoid excessive reduction of Cu2+ to inactive metallic Cu, which tends to decrease the catalytic activity. In this work, Cl−-modified Cu2O catalysts with different Cl content were prepared by co-precipitation. The characterization results demonstrated that Cl− remained in the lattice structure of Cu2O, inducing the expansion of the Cu2O lattice and the enhancement of the Cu–O bond strength. Consequently, the reduction of Cu+ to Cu0 was effectively prevented in reductive media. Moreover, the activity and stability of Cu2O were significantly improved. The Cl− modification increased the yield of 1,4-butynediol (BD) from 73% to 94% at a reaction temperature of 90 °C. More importantly, the BD yield of Cl− modified Cu2O was still as high as 86% during the ten-cycle experiment, whereas the BD yield of Cu2O in the absence of Cl− decreased sharply to 17% at the same reaction conditions. This work provides a simple strategy to stabilize Cu+ in reductive media.
Sheaf-like CeO2 (CeO2-S) in microscale was prepared by the hydrothermal method, and then etched with KOH aiming to obtain an imperfect fluorite structure (CeO2-SK) with high content of oxygen vacancies and oxygen mobility. With CeO2-S and CeO2-SK as supports respectively, a modified colloidal deposition method was employed to obtain Pd/CeO2 catalysts for being used in lean methane combustion. According to the inductively coupled plasma (ICP), N2 physisorption and scanning electron microscopy (SEM) results, the Pd supported catalysts are very similar in their Pd loading, surface area and morphologies. SEM and transmission electron microscopy (TEM) results revealed various nanorods exposed CeO2 (110) and (100) facets on Pd/CeO2-SK surface after KOH etching. Raman spectra and H2-temperature programmed reduction (H2-TPR) results indicated that Pd/CeO2-SK catalyst has a much higher content of catalytic active PdO species than Pd/CeO2-S catalyst. It was also found that the catalytic performance of Pd/CeO2 in lean methane combustion depends greatly upon the exposing crystal planes and oxygen vacancies content of sheaf-like CeO2, and Pd/CeO2-SK exhibits higher activity than Pd/CeO2-S. The larger amount of CeO2 (110) and (100) planes on Pd/CeO2-SK surface can enhance the formation of oxygen vacancies, active Pd species and migration of lattice oxygen, which all evidently improve the redox ability and catalytic activity of the Pd/CeO2-SK catalysts in lean methane combustion.