Graphene oxide (GO) were utilized to improve the interfacial performance of carbon fiber (CF) and epoxy resin. An effective way to prepare graphene oxide/carbon fiber hybrid fiber was proposed by the treatment with hydrogen peroxide and concentrated nitric acid combined with electrophoretic deposition process. A characterization of the fiber surface properties was done before and after coating (surface morphologies, surface chemistry, and surface energy). Results showed that a uniform and thick graphene oxide films were tightly attached on the surface of carbon fiber. Moreover, surface wettability of carbon fibers to epoxy resin is significant improved by enhanced surface free energy due to the deposition of GO. Meanwhile, the introduction of GO in the carbon fiber/epoxy resin composites results in a 55.6% enhancement in the interlaminar shear strength, measured by short beam shear tests. Such a fabrication process is simple and effective, without complex chemical reactions and long processing time, and can be a continuous one for industrial scale.
Carbon nanotube (CNT) coatings were utilized to enhance the interfacial properties of carbon fiber (CF)/epoxy(EP) composites by ultrasonically assisted electrophoretic deposition (EPD). A characterization of the CF surface properties was done before and after coating (surface chemistry, surface morphologies, and surface energy). The result shows that oxygenated groups concentrations of the CF surfaces experienced significant increases from 12.11% to 24.78%. Moreover, the uniform and homogeneous CNT films were tightly attached on the surface of CF, and the surface wettability of CF is significant improved by enhanced surface free energy when introduced ultrasonic during the EPD process. In addition, the interlaminar shear strength (ILSS) and water absorption of CF/EP composite were measured. Scanning electron microscopy (SEM) revealed that the fracture mechanisms of the new interface layer formed by depositing CNTs on the CF surface contributed to the enhancement of the mechanical performance of the epoxy. This means that the efficient method to improve interfacial performance of composites has shown great commercial application potential.