Additive Manufacturing (AM) has been considered an innovative technology for the development of orthoses. Even so, the use of AM, utilizing low cost rigid and flexible material which can be used in different ways by the same user, to produce a modular orthosis has yet to be explored. Purpose: Develop a modular wrist, hand and finger orthosis that can be utilized as a functional or static orthosis, depending on the therapeutic objective. This being produced by low cost Additive Manufacturing, through a single anatomy acquisition process. Approach: Firstly, requirements for modularization and development were defined in a team with occupational therapists and mechanical engineers, After indirect anatomy acquisition of a volunteer, without disabilities, two parts of the same orthosis were modeled, one flexible (functional) and the other rigid (static). These were printed on PLA (rigid part) and flexible TPU (functional part) with an Open Source printer. In addition, fastening strips were also made in flexible TPU. Findings: Three parts of which make up the modular orthosis were produced. This can be used in two different ways; one being to maintain the static posture of the wrist, hand and fingers and the other to provide functionality of the hands, but with the correct positioning of the wrist and thumb. Originality: Even with low-cost material and an open source machine, it was possible to generate an innovative proposal with the use of AM as the orthosis manufacturing process.
Intracranial aneurysm (IA) rupture is responsible for 80% of spontaneous arachnoid hemorrhages and associated with an extremely high mortality rate. Two possible surgical interventions are endovascular embolization and microsurgical clipping. Three-dimensional (3D) prototyping models help in surgical planning minimizing perioperative risks in both methods and reducing operating time. Methods 3D biomodels were printed with flexible material (elastomer) using angiotomographic DICOM acquired images and compared to 3D digital subtraction angiography (DSA) images. Results 3D biomodels represented the aneurysm angioarchitecture exactly, especially the neck and domus features. Conclusion Elastomers 3D biomodels proved to be a trustworthy representation of the angiotomographic images and could be used to help surgical planning in IA treatment.
A manufatura aditiva ou impressão 3D é um novo método para a criação de modelos anatômicos humanos e veterinários, que torna a educação de alunos e profissionais da área da saúde mais completa, além de auxiliar o entendimento dos próprios pacientes. Na área da cardiologia, esta técnica pode auxiliar de maneira eficiente a avaliação das alterações cardíacas para o paciente durante as consultas médicas, atrelando um sentimento de envolvimento com a equipe médica. Da mesma maneira, é possível utilizar a impressão 3D para o entendimento da técnica ecocardiográfica, onde é necessário conhecimento conceitual da anatomia do coração e a capacidade de traduzir uma imagem de ultrassonografia bidimensional em uma ideia tridimensional. Este artigo teve como objetivo desenvolver modelos cardíacos 3D imprimíveis, com o intuito de demonstrar cortes cardíacos utilizados na ecocardiografia e utilizá-los para ensinar os tutores de cães, avaliando sua adequação como ferramenta para melhor compreensão do exame ecocardiográfico. Imagens em DICOM de um exame de tomografia computadorizada de uma cadela foi adquirida para criação, edição e impressão dos diferentes modelos em 3D, que representam os cortes ecocardiográficos. Os modelos cardíacos em 3D foram validados por tutores de cães por meio de um questionário de avaliação elaborado em uma escala Likert, após acompanhamento do exame ecocardiográfico com uma explicação pelo ecocardiografista utilizando os modelos impressos. Um total de 30 tutores de cães participaram do estudo. Em todas as sete perguntas do questionário, foram observadas em sua grande maioria respostas positivas, sendo elas com concordância parcial ou total dos participantes. Até o momento não foram encontrados na literatura estudos com modelos de coração desenvolvidos para a educação clínica dos tutores de cães. Os resultados revelam que o uso dos modelos impressos em 3D é eficaz para melhorar a compreensão do exame ecocardiográfico e é viável no fluxo de trabalho diário.
20 August 2024 in Journal of Veterinary Medical Education
Three-dimensional (3D) printing is a new method of creating anatomical models, which can enhance the training of students and health professionals. The large breed-variation in dogs means that interpretation of thoracic radiographs can be challenging for the inexperienced radiologist. The aim of this study was to develop digital and printed 3D cardiac models from six canine breeds and evaluate their use as a tool for studying breed variations in radiology. The printed and digital 3D cardiac models were used by postgraduate veterinary students in diagnostic imaging along with a theoretical class on the subject and students completed a pre- and post-test, assessing cardiac size on thoracic radiographs in order to verify the usefulness of the models. The students then completed a satisfaction questionnaire using a Likert scale. There was a significant difference between the pre-test and the post-test results, with greater accuracy after using the 3D models. More errors were made in pre-test interpretation of radiographs from English Cocker Spaniel, English Bulldog, and Yorkshire Terrier and there were a significantly higher number of correct answers after using the 3D models. The vast majority of responses to all questions in the satisfaction questionnaire were positive, with partial or total agreement of the participants. This study demonstrates that digitally printed cardiac models from different breeds of dogs are effective learning tools. They helped students to better understand the relevant spatial relationship and cardiac morphology and to compare this anatomy with the radiographic image. Models are provided in 3D PDF and STL files for download.
The main goal of this study was to reconstruct three-dimensionally (3D) the sphenoid bone of adolescents with the software Materialise Mimics to test the accuracy and reliability of craniometric measurements performed with the software. The study was conducted according to Strengthening the Reporting of Observational studies in Epidemiology (STROBE) guidelines. Cone-Beam Computed Tomography (CBCT) was performed in adolescents before the orthodontic treatment as part of the orthodontic records. The CBCT images were exported as DICOM (Digital Imaging and Communication in Medicine) files, in a universal format, with a voxel size of 0.3 mm and sphenoid bone was three-dimensionally rendered with Software Materialise Mimics. Ten sphenoid measurements were performed in triplicate by two trained examiners. The studied population was composed of 26 adolescents, 16 females (61.5%), and 10 males (38.5%) with a mean age of 12.5 years (SD= 1.7). 60 measurements were taken and the intra and inter-examiner accuracy revealed a high degree of data reproducibility (Kappa test higher than 0.90). The reconstruction and rendering of the images obtained by CBTC allowed anatomical details of the sphenoid bone to be measured with very high reproducibility. The Software Materialise Mimics allows you to analyze anatomical structures in detail and presents useful tools to optimize craniometry analyses.
2 January 2024 in Contribuciones A Las Ciencias Sociales
The traditional teaching of Anatomy requires the use of cadaveric pieces that are often difficult to obtain, preserve and maintain. In this sense, additive manufacturing (AM), also known as 3D printing, can be a useful tool since it makes it possible to produce synthetic models from real anatomical structures. The main goal of this work was to develop anatomical models of an ovine stomach by 3D modeling and printing. A conserved ovine stomach was computed tomography scanned and the anatomical images obtained were reconstructed from the DICOM files using the InVesalius software and used for modeling and printing anatomical models in reduced scale with their peculiar anatomical characteristics. Three models were defined to represent the external and internal morphology: i. closed stomach; ii. stomach opened laterally, and iii. stomach cut sagitally. All models were printed on polylactic acid (PLA) by extrusion material process on an Ender 5 Pro printer. The models produced were adequate since they allowed observing details of the external and internal morphology of the ovine stomach. In addition, these models are presented as an innovative approach to anatomical study when combined with real organs.