A compressible Hybrid Lattice Boltzmann Method solver is used to perform a wall-resolved Large eddy simulation of an isothermal axisymmetric jet issuing from a pipe and impinging on a heated flat plate at a Reynolds number of 23 000, a Mach number of 0.1, and an impingement distance of two jet diameters. The jet flow field statistics, Nusselt number profile (including the secondary peak), and shear stress profile were well reproduced. The azimuthal coherence of the primary vortical structures was relatively low, leading to no discernible temporal periodicity of the azimuthally averaged Nusselt number at the location of the secondary peak. While local unsteady near-wall flow separation was observed in the wall jet, this flow separation did not exhibit azimuthal coherence and was not found to be the only cause of the thermal spots blue, which lead to the secondary peak in the Nusselt number, as stream-wise oriented structures also played a significant role in increasing the local heat transfer.
15 May 2023 in International Journal of Heat and Mass Transfer
A 8-chanenel interface IC for ambient vibration energy harvesting from broadband MEMS transducer array is presented. A rectifier-free synchronized electrical charging extraction (RF-SECE) architecture is proposed to harvest low voltage ambient vibration. A nW zero-crossing detector with compensation loop calibrates the comparator offset adaptively. Conflict-free inductor sharing by multiple channels is achieved with an asynchronous arbiter. The chip works in 100 Hz - 2KHz range with 15 nA/channel quiescent power and 580% efficiency improvement compared to the full-bridge rectifier at 0.3V input.