Rapid exploitation of city underground space has led to the development of increasingly more underground slender-shape infrastructure like pedestrian tunnels, concourses, subway walkways, underground shopping streets, etc. Pedestrian evacuation in those public places in case of emergency can be disastrous if not properly guided. Therefore, it is important to understand how to enhance the evacuation efficiency through proper active guidance. In this study, we propose a digital twin based guiding system for pedestrian emergency evacuation inside a slender-shape infrastructure, aiming at enhancing the overall evacuation efficiency. Composition and calibration process of the guiding system are described, and a cellular automata based model is established to serve as the digital twin model. Two guidance strategies, namely traditional fixed guidance and smart guidance, are adopted by the digital twin to generate guidance instructions. A smart guidance strategy using a semi-empirical approach is proposed based on the understanding of the free movement and congested movement of pedestrian flow. Systems under different guiding strategies are compared and discussed over their effectiveness to promote excavation efficiency in different pedestrian population distribution settings. The simulation results show that a system under smart guidance tends to have shorter evacuation time (up to 23.8% time saving) and performs with more stability for pedestrian evacuations over the traditional fixed guided systems. The study provides insight for potential real applications of a similar kind.
19 May 2021 in IEEE Journal of Solid-State Circuits
In this article, a fully integrated capacitorless low-dropout regulator (LDO) is presented for Internet-of-Things (IoT) edge sensor application. To achieve sub-1-V operation and fast transient response with low quiescent current, the conventional operational transconductance amplifier (OTA)-based error amplifier (EA) is replaced with oscillator-based voltage-to-time converter and time-domain signal processing, including time-domain edge-based frequency comparator (FC) and event-driven voltage mode charge pump (CP). Compared with the conventional phase frequency detector (PFD), the proposed clock-edge-based FC achieved more than six times power reduction. Event-driven CP is adopted to drive analog power transistor and the transient response is enhanced by feedforward capacitor $C_{\mathrm {FD}}$ and coarse–fine CP control. To further reduce the power consumption, multi-voltage domain and clock frequency optimization are implemented. A prototype chip is fabricated in a standard 65-nm CMOS process. The design only consumes 310-nA quiescent current while achieving 0.5–1.2-V input range, $1.0\times 10^{6}$ load dynamic range, and 3-fs figure of merit (FoM).
9 May 2023 in IEEE Journal of Solid-State Circuits
This article presents a direct digitization bio-impedance (BioZ) readout IC with high power-to-noise efficiency over a wide input impedance range. This design features a delta-sigma ( $\Delta \Sigma )$ -based BioZ readout topology with the first-order noise shaping and a feedback current-steering digital-to-analog converter (IDAC) that minimizes the residual current to suppress the input-dependent noise modulation in current balancing instrumentation amplifier (CBIA). Furthermore, various dynamic element matching (DEM) techniques are applied to mitigate the impact of 1/ $f$ noise and switching noise during analog to digital conversion. The proposed BioZ readout circuit was implemented in a standard 40-nm CMOS process. Measurement results showed 101.9-dB SNR within 4-Hz bandwidth with lower than 0.1-Hz 1/ $f$ noise corner and 152.6-dB figure-of-merit (FoM) for $I$ path.
An inductively powered implantable neural stimulator IC is presented in this paper. It features closed-loop power control, active charge balancing, and electrode impedance check functions. The stimulator IC is powered through 13.56MHz inductive link and supports 33.3kbps bi-directional telemetry with ASK for forward command transmission and LSK for backward data transmission, achieving 20V high compliance voltage, maximum 1.24mA stimulation current, and the resting potential of 50mV. The IC has an active area of 2mm×2mm implemented in 0.18-μm CMOS process with 24V LDMOS option.
A 8-chanenel interface IC for ambient vibration energy harvesting from broadband MEMS transducer array is presented. A rectifier-free synchronized electrical charging extraction (RF-SECE) architecture is proposed to harvest low voltage ambient vibration. A nW zero-crossing detector with compensation loop calibrates the comparator offset adaptively. Conflict-free inductor sharing by multiple channels is achieved with an asynchronous arbiter. The chip works in 100 Hz - 2KHz range with 15 nA/channel quiescent power and 580% efficiency improvement compared to the full-bridge rectifier at 0.3V input.
A 13.56 MHz active rectifier for wireless powered medical implants is presented in this paper. Only PMOS power transistors are used in the AC-DC interface in the active rectifier to prevent the inherent parasitic diode conduction that may lead to potential latch-up during the rectifier start-up period. To eliminate the reverse current introduced by the delay of comparator signal, a delay compensation loop is designed to dynamically adjust the rectifier at various DC output. A fully onchip $2 \times$ charge pump and capacitor assisted driver/sampling circuits are proposed to turn on/off the power PMOS in the rectifier. The rectifier is implemented in a standard 0.18-$\mu$ m CMOS process with a core active area of 0.4 mm $\times0.9$ mm. The measurement results show that this PMOS rectifier achieves peak power efficiency of 85% when load resistor is $500 \Omega$ and the DC output voltage range is 2V--3.5V.