13 December 2019 in Physical Review Applied
In ferromagnetic/heavy-metal bilayer systems, spin-current transmission with high efficiency between the heavy-metal layer and the ferromagnetic layer across the interface is crucial for power-efficient spin-orbit torque magnetic random access memory (SOT MRAM). The spin-mixing conductance is one of the critical parameters that determines such efficiency at the interface. For the -- bilayer system, which is a promising candidate for SOT MRAM, improving the spin-current transmission efficiency at the interface by interface engineering, however, is not readily well studied. Here, we report that, by inserting an atomically thin α-W layer at the interface of -- to construct the --/α-W/β-W trilayer system, the spin-mixing conductance can be enhanced by about 45%. A modified theoretical model is proposed that, in accordance with the experimental results, by considering the spin-backflow current as an equivalent spin resistance, the enhancement of spin-mixing conductance is attributed to suppression of the spin-backflow current by introducing α-W. This study demonstrates that interfacial phase engineering between multiphases of the same heavy metal is effective at enhancing the spin-mixing conductance in ferromagnetic/heavy metal bilayer systems, which may further improve spin-current transmission efficiency and help realize power-efficient SOT MRAM based on -- systems.
16 March 2020 in Materials Horizons
The tunable range of RF/microwave devices is limited not only due to the difficulty in growing high-quality magnetic oxide thin films but also because of their low magnetostrictive coefficient as in Y3Fe5O12 (YIG) thin films. In this work, we have fabricated flexible YIG thin films by using pulsed laser deposition (PLD) technology, which exhibit a low-damping constant (2.67 × 10−4) and well-established magnetic properties suitable for RF/microwave materials. A noticeable ferromagnetic resonance (FMR) field shift of 180 Oe was obtained along the out-of-plane direction via a flexible tunable factor f(R), which results in a frequency shift as high as 550 MHz. The result shows a greater FMR tuning than that induced by ferroelectric single crystals. At the same time, a systematic theoretical framework for tuning FMR characteristics was presented for the flexible YIG/mica thin films, which would provide an effective tuning method for other flexible magnetic oxides with low magnetostrictive coefficients. Last but not least, a flexible coplanar waveguide (CPW) integrated with the flexible YIG thin films shows excellent microwave magnetic stability and fatigue-resistant behavior. It would open a new door for further applications, such as flexible spiral detectors and high-frequency signal processors in the near future.
13 November 2019 in Advanced Electronic Materials
22 October 2020 in Journal of Materials Chemistry C
Flexible epitaxial ferrite thin films are crucial for flexible RF/microwave devices; however, they are difficult to be fabricated due to critical growth conditions. In this work, we demonstrate a water-dissolvent process to obtain high-quality freestanding single-crystal NiZn-spinel ferrites. By utilizing their high flexibility, significant mechanical tuning of magnetic properties in flexible NZFO epitaxial thin films has been achieved, which is much greater than those of traditional multiferroic heterostructures using rigid substrates. A giant FMR field shift of 2027 Oe was achieved with the contribution of the two magnon scattering effect, where the spin-wave propagation is sensitive to lattice deformation, and spin–spin interactions can be manipulated easily via strain/stress conditions. The result indicates that the freestanding epitaxial ferrite thin films will be widely used in flexible RF/microwave applications in the future.