With the increasing industrial implementation of additively manufactured metal parts, the welding of such components gains importance. Due to size limitations of laser powder-bed fusion (PBF-LB) machines and design constraints, subsequent joining processes are required. However, the weld seam quality of PBF-LB manufactured parts, particularly aluminum parts, is still limited by pore formation in the weld seam. These pores are believed to be primarily caused by the agglomeration of hydrogen. Therefore, this study investigates the pore formation during laser beam welding of PBF-LB manufactured AlSi10Mg parts by means of in-situ high-speed synchrotron X-ray imaging. In addition, an in-situ laser powder drying process is investigated to reduce the hydrogen content of PBF-LB manufactured aluminum parts in order to prevent the formation of hydrogen porosity during the subsequent welding process. Results show that pores predominantly form in the interdendritic region at the solidification front due to the locally increased hydrogen concentration. By applying laser powder drying, the hydrogen content can be reduced by up to 25%, thereby effectively preventing the formation of hydrogen pores.
A significant challenge in laser drilling is the optimization of process parameters and drilling strategies to achieve high-quality holes. This is further complicated by the fact that quality assessment is a manual and time-consuming task. This paper presents a methodology designed to significantly reduce the manual effort required in optimizing parameters for single-pulse laser drilling of 0.3 mm thick stainless steel. The objective is to precisely drill holes with an entry diameter of 70 µm and an exit diameter of 20 µm, achieving high roundness. The features of the drilled holes were extracted automatically from the raw data. The outcomes were compared against manual measurements. Results indicate that the mean deviations between automated and manual measurements for both inlet and outlet diameters are less than 1.5 µm. Based on the results of the feature extraction, we employed a Bayesian optimization algorithm to efficiently explore the parameter space without the need for incorporating expert knowledge. The approach rapidly identified optimal drilling parameters after only a few iterations, significantly expediting the optimization process and considerably reducing manual labor.
11 March 2026 in Lasers in Manufacturing and Materials Processing
Double-core fibers that deliver laser beams with adjustable amounts of power to the central core and the surrounding ring component of the fiber are of major interest for optimizing laser welding processes. However, the central focussed laser spot and the ring diameters are fixed by the fiber dimensions, the focusing optics, and the laser systems involved. This work investigates the influence of different ring beam diameters, with a constant central spot diameter, on the capillary dynamics and the formation of pores in the resulting welds in 1.4301 stainless steel (X5CrNi18-10, AISI 304). The different core-ring configurations were achieved using specially designed beam-shaping optics. The generation of pores during the welding process was examined by means of synchrotron X-ray imaging. The results show that different ring diameters have a profound effect on the melt pool geometry, the capillary shape and the location of the capillary collapse which gives rise to pore formation in the weld. In the examples presented here, larger ring diameters extended the melt pool in the direction of welding without contributing directly to the capillary evaporation. In this case the narrow, deep capillaries which are created by the core beam alone can bulge and collapse, trapping vapor and gas to create large pores. If, however, the ring beam has a small enough diameter, it can help to produce a wider capillary which does not trap gas and create pores in the same way. The mechanisms by which large bubbles in the melt can result in non-spherical pores in the weld are also explained.