25 September 2003 in Physical Review Letters
We have investigated the atomistic mechanism behind the irradiation-induced amorphization in Si using molecular dynamics simulation techniques. The microscopic description of the process is based on the defect known as bond defect or IV pair. IV pairs recombine very fast when isolated, but if they interact to each other they survive longer times and thus accumulate giving rise to amorphization. This fact accounts for the superlinear behavior of the accumulated damage with dose and the different activation energies for recrystallization observed in the experiments. The molecular dynamics results have been used to define an atomistic model for amorphization and recrystallization which has been implemented in a kinetic Monte Carlo code. The model is able to reproduce quantitatively the dependence of the critical crystal-amorphous transition on the irradiation parameters.
26 July 2004 in IEEE Journal of Solid-State Circuits
In this paper, a 10-bit 40-MS/s analog-to-digital converter (ADC) is presented. A power consumption of 12 mW was achieved by using a time-interleaved and pipelined architecture with shared operational amplifiers. This circuit was fabricated in a 2.5-V 0.25-/spl mu/m technology with metal-oxide-metal capacitors. Experimental results are within design ranges and are in good agreement with simulation data. It turns out that the proposed Nyquist-rate ADC provides a potential solution for low-power high-speed applications, e.g., wireless LANs.
7 March 2018 in Chemistry – A European Journal
15 July 2003 in Journal of Applied Physics
Kinetic Monte Carlo simulations are used to analyze the ripening and dissolution of small Si interstitial clusters and {113} defects, and its influence on transient enhanced diffusion of dopants in silicon. The evolution of Si interstitial defects is studied in terms of the probabilities of emitted Si interstitials being recaptured by other defects or in turn being annihilated at the surface. These two probabilities are related to the average distance among defects and their distance to the surface, respectively. During the initial stages of the defect ripening, when the defect concentration is high enough and the distance among them is small, Si interstitials are mostly exchanged among defects with a minimal loss of them to the surface. Only when defects grow to large sizes and their concentration decreases, the loss of Si interstitials through diffusion to the surface prevails, causing their dissolution. The presence of large and stable defects near the surface is also possible when the implant energy is low—small distance to the surface—but the dose is high enough—even smaller distance among defects. The exchange of Si interstitials among defects sets a interstitial supersaturation responsible for the temporary enhancement of the diffusivity of interstitial diffusing dopants. The transitory feature of the enhancement is well correlated to the extinction of the Si interstitial defects.
1 September 1994 in Semiconductor Science and Technology
28 March 2017 in The Journal of Organic Chemistry