18 June 2019 in IEEE Transactions on Antennas and Propagation
This communication presents a dual-polarized series-fed array antenna with 30° beam-pointing for Millimeter-Wave (MM-Wave) applications. The 45° and -45° polarized subarrays share the aperture in the shape of interdigital. The spacing between subarrays with the same polarization orientation is set to 0.56λ0 through the using of narrower T-Type folded substrate integrated waveguide (TFSIW) instead of substrate integrated waveguide (SIW). The substrate integrated coaxial line (SICL) is adopted to design the array feeding network. To validate the proposed design, a 4×6 (single polarization) dual-polarized array antenna operating at 28 GHz with 30° beam-pointing is fabricated. Based on the measurement, the return losses are lower than -10 dB from 27.5 GHz to 28.5 GHz, the isolations between the two polarization ports are higher than 30.0 dB in the frequencies mentioned above, the maximum gain at the center frequency is 15.7 dBi, and the cross-polarization levels are lower than -18.5 dB. The proposed antenna only needs one-step processing with the standard PCB technology without additional stitching assembly. Simulated and measured results of the proposed antennas were compared.
27 April 2023 in IEEE Transactions on Vehicular Technology
Based on the all-metal structure of the crossed dipole antenna, the base station antenna with heat dissipation function is realized by introducing metal PIN structures of different heights between the radiator and the ground, on the radiator, and in the hollow part inside the radiator. Through the distribution of current on the surface of the antenna, the working principle of the antenna and the influence of the heat dissipation PIN structure on the radiation characteristics of the antenna are analyzed. The measurement results of the 3 × 3 antenna array show that the operating frequency band with voltage standing wave ratio (VSWR) less than 1.5 is 3.1–4.0 GHz. The gains of the central and edge elements in the array are greater than 5.6 dBi and 6.9 dBi, respectively. The front-to-back ratio is greater than 19 dB, the axial cross-polarization discrimination (XPD) is greater than 15 dB, and the XPD within the range of ±30° is greater than 10 dB. The thermal simulation results show that the maximum temperature of the proposed antenna array is lower than that of the microstrip antenna array and traditional dual-polarized dipole antenna array under the conditions of heat source power of 3.3 W, 14.1 W, and 18.8 W. The temperature differences between the proposed antenna and the microstrip antenna array are 18.6°C, 76.2°C, and 98.9°C, while the temperature differences between the proposed antenna and the traditional dipole antenna array are 8.9°C, 38.2°C, and 50.9°C. Under the above three power conditions, the difference between the maximum and minimum temperatures of the microstrip antenna array is 25.2°C, 104.5°C, and 136.8°C, and the temperature difference of the traditional dipole antenna array is within 7°C, while the proposed array is within 6.2°C. All of this indicates that the proposed antenna array has strong thermal conductivity and heat dissipation performance.
11 January 2022 in IEEE Transactions on Antennas and Propagation
This paper proposes a synthesis method of orthogonal beamforming networks (BFNs) with arbitrary ports. The proposed method is based on matrix decomposition theory and breakthrough the synthesized BFN number to arbitrary. It has been theoretically demonstrated that the BFN with cascading 180° hybrid couplers can synthesize shaped beams. Therefore, a BFN synthesis method that combines the QR decomposition theory and the optimization algorithm is introduced. With the help of an optimization program, a specific power ratio of each 180° hybrid coupler in the BFN is determined. The proposed synthesis method is verified by experiments with an orthogonal 6 × 2 BFN with flat-topped radiation patterns. Through optimization, five 180° hybrid couplers with different power ratios synthesize the proposed BFN. Results show that two flat-topped beams with a beam-width of (32±0.3)°, gain ripples less than 2.5 dB, and a side-lobe level less than 12 dB are achieved. The proposed method has the advantages of high accuracy and efficiency and a simple structure, which makes it convenient for multi-beam antenna arrays in multiple-input multiple-output (MIMO) systems.
2 December 2021 in International Journal of RF and Microwave Computer-Aided Engineering
This paper presents a new compact four-port component with dual-functional dual-mode characteristics for spatial diversity and multiplexing applications. The component can achieve the 3-dB hybrid coupler mode at the lower frequency and the transmission line mode at the higher frequency, corresponding to spatial diversity and multiplexing applications, respectively. The proposed component is designed based on a three-section crossover and analyzed based on the Even-odd model analysis. It features good S-parameter characteristics, compact size, and none of the RF switches. A component working at 4.5-/5.4-GHz has been fabricated and measured to prove its design theory. To practice, the proposed component is applied to a 1 × 2 wideband Yagi antenna array. The measured results show diversity beams and multiplexing beams at two operating bands respectively, suitable for complex wireless communication systems.