In the present work, monolithic SiC/(Hf0.75Ta0.25)C(N)/(B)C ceramic composites are prepared via spark plasma sintering of amorphous SiHfTa(B)CN‐based powders synthesized from single‐source precursors. The as‐sintered ceramic nanocomposites are investigated by X‐ray diffraction, Raman, scanning electron microscopy, and transmission electron microscopy in order to study their microstructure and chemical composition. Furthermore, the thermal conductivity, the thermal expansion, as well as the hardness and Young's moduli of the prepared monolithic samples are determined. The incorporation of boron in the system results in enhanced densification due to decreased porosity and improved distribution of the individual phases in the composite after sintering. These favorable effects also positively influence the thermomechanical properties of the composite. The boron‐modified sample displays a decreased thermal diffusivity and conductivity compared with the boron‐free sample. Additionally, a macro‐hardness obtained by Vickers indentation of 31 GPa is achieved for loads up to 196 N, surpassing the hardness of ultrahard materials like silicon carbide, hafnium carbide, and tantalum carbide as well as their solid solutions. Young's moduli of the composites were analyzed to 405 ± 10 and 277.5 ± 41 GPa for the boron‐containing and boron‐free samples, respectively.
23 February 2024 in Advanced Engineering Materials
The oxidation behavior of polymer‐derived (HfxTa1−x)C/SiC nanocomposites at 1200 °C and 1400 °C for up to 100 h is investigated in this work. Overall, the chemical modification of the polycarbosilane‐based precursor with Hf and Ta leads to an improved oxidation behavior due to an increased densification. Shifting the Hf/Ta ratio from (Hf0.2Ta0.8)C/SiC to (Hf0.7Ta0.3)C/SiC results in an improved oxidation behavior due to Hf6Ta2O17 formation and the reduction of Ta2O5 formation, which reduces cracking of the samples. The formation and microstructure of SiO2 as well as the internal oxidation of (HfxTa1−x)C precipitates is explained by thermodynamic and kinetic considerations.
24 April 2022 in Journal of the American Ceramic Society
The focus of the present work is the investigation of the influence of polymer‐derived ceramics, used as sintering aids for preparing ZrB2‐based monoliths, on their high‐temperature oxidation behavior. For the preparation of the monoliths, ZrB2 powder was coated with polymer‐derived SiCN, SiZrCN, or SiZrBCN and subsequently densified via hot‐pressing at temperatures as low as 1800°C. To investigate the oxidation kinetics, thermogravimetric analysis (TGA) was performed at 1300°C in synthetic air with exposure times of 50 and 100 h. A detailed study of the materials oxide scale and subsurface microstructure was conducted using optical microscopy, electron probe microanalysis, scanning electron microscopy, and X‐ray diffraction. The experimental findings were compared to thermodynamic equilibrium calculations using the CALPHAD method, which led to a better understanding of the oxidation mechanism. In comparison to the literature data of ZrB2–SiC, the results show improved oxidation resistance for all three investigated materials. The formation of gaseous species during oxidation, in particular CO, CO2, B2O3, and SiO, within the oxide scale of the monoliths was rationalized via CALPHAD calculations and used to explain the oxidation behavior and kinetics and also the formation of bubbles in the subsurface region of the oxidized specimens.