Miaomiao Zhang

Miaomiao Zhang

Auto-generated profile, based on publicly available information

Miaomiao Zhang

Department of Civil and Environmental Engineering, The University of Tennessee, Knoxville, TN

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications

15 June 2022 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
YMYuetan Ma
Yuetan Ma
PPPawel Andrzej Polaczyk
Pawel Andrzej Polaczyk
MZMiaomiao Zhang
Miaomiao Zhang
Rui XiaoRui Xiao
Rui Xiao
XJXi Jiang
Xi Jiang
BHBaoshan Huang
Baoshan Huang
The use of hot in-place recycling (HIR) for pavement surface rehabilitation has gained increasing attention in recent years with the aim of achieving sustainable pavement. For the purpose of cost saving and the consumption of 100% reclaimed asphalt pavement (RAP), an in-place HIR train has been developed to combine various units including preheating, milling, rejuvenating, and compacting. Compared with the conventional hot-mix asphalt (HMA) surface treatment, the HIR technique might result in different pavement performances as a result of the low mixing temperature and insufficient quality control. This study aimed to conduct a comparative analysis of pavement surface rehabilitation using HIR and HMA, including the performance evaluation, pavement life prediction, and life cycle cost analysis (LCCA). HIR and HMA mixes were collected from construction areas and the nearby asphalt plant, respectively. The loose mixes were reheated and compacted for performance testing, including dynamic modulus tests, Superpave IDT tests, and moisture susceptibility tests. The AASHTOWare Pavement ME Design software was adopted to predict the pavement life with two rehabilitation techniques, followed by the LCCA with regard to the prediction results. Test results showed that pavement surface rehabilitation with HIR achieves acceptable performance and economic benefits. However, the HIR mixes are brittle and more susceptible to cracking and, therefore, have shorter pavement service lives than HMA.

30 August 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
Rui XiaoRui Xiao
Rui Xiao
MZMiaomiao Zhang
Miaomiao Zhang
Jingtao ZhongJingtao Zhong
Jingtao Zhong
GBGaylon L. Baumgardner
Gaylon L. Baumgardner
BHBaoshan Huang
Baoshan Huang
The surface energy of aggregate in asphalt pavements has a huge impact on its moisture susceptibility. The commercial antistripping agents widely used in asphalt may not be effective enough to enhance the moisture resistance if large quantities of acidic aggregates exist in pavements. This is also the reason why moisture damage is still an issue in many U.S. regions primarily supplied with “problematic” aggregates. In this regard, a promising solution is to use waste-plastic-coated aggregate, the surface of which is fundamentally modified and has a high affinity with asphalt because of the hydrophobic nature of plastic. However, it has not been widely promoted in the industry since there needs to be a practical and reliable method for uniform coating and avoiding the agglomeration of fine aggregate. To this end, an entirely new coating technology (thermoplastic polyethylene powder coating [TPPC]) was developed to coat aggregate using polyethylene (PE) powder. This technology utilizes a cheap but highly wettable fluidized bed to stably disperse the hydrophobic PE powder. Then, the dispersion liquid is sprayed onto the hot aggregate where the fluidized bed will evaporate fast while the PE particles stay, melt, and coat the aggregate surface. The microstructures of the coated aggregate were directly observed by scanning electron microscopy. Surface energy-based thermodynamic parameters were used to demonstrate the effect of TPPC on the moisture resistance of asphalt mixtures. This technology can be extended to other types of waste plastic if suitable fluidized beds are developed.

7 April 2023 in Transportation Geotechnics
Verified
Journal Article
Closed access
MZMiaomiao Zhang
Miaomiao Zhang
GFGuozhi Fu
Guozhi Fu
YMYuetan Ma
Yuetan Ma
RXRui Xiao
Rui Xiao
BHBaoshan Huang
Baoshan Huang

11 July 2018 in Analytical Letters
Verified
Journal Article
Closed access
YZYun Zhang
Yun Zhang
XSXiaohui Si
Xiaohui Si
MZMiaomiao Zhang
Miaomiao Zhang
XYXue Yang
Xue Yang
HYHuan Yuan
Huan Yuan
Hui WangHui Wang
Hui Wang
Human procalcitonin is an early diagnostic biomarker for sepsis and bacterial infections and can be used in distinguishing bacterial infections from viral infections. In this study, a colorimetric sensing platform for the rapid determination of procalcitonin was developed. The approach involves the capture of procalcitonin by immunomagnetic beads, and a detection antibody labeled with horseradish peroxidase to perform sandwich format, where it catalyzes the oxidation of 3,3′,5,5′–tetramethylbenzidine to produce the colorimetric signal. Under the optimal conditions, a detection limit of 0.04 ng/mL (3σ) was obtained within the calibration range 0.1–10 ng/mL. The proposed method was performed in less than 90 min and exhibited good specificity without interferences from other biomarkers including C-reactive protein and human serum albumin. Overall, the proposed method provided a new alternative strategy for procalcitonin detection due to its sensitive, rapid, specific, and simple characteristics. This method is suitable for rapid screening of various biomedical targets.

19 September 2023 in Transportation Research Record: Journal of the Transportation Research Board
Verified
Journal Article
Closed access
MZMiaomiao Zhang
Miaomiao Zhang
XJXiaoyang Jia
Xiaoyang Jia
GFGuozhi Fu
Guozhi Fu
PPPawel Andrzej Polaczyk
Pawel Andrzej Polaczyk
YMYuetan Ma
Yuetan Ma
BHBaoshan Huang
Baoshan Huang
The traffic speed deflectometer (TSD) overcomes the limitations of the falling weight deflectometer (FWD) with respect to traffic interruption and test inefficiency and is considered the preferred method for network-level pavement structural evaluation. However, some challenges exist when applying the TSD to routine survey work. This study evaluated the long-term repeatability of TSDs and compared TSD measurements with FWD measurements to examine device-related errors in TSD measurements. In addition, a framework for incorporating TSD measurements into the pavement management system (PMS) was developed by introducing deflection bowl parameters (DBPs). All data analyses were based on TSD data collected in Tennessee. From the current study, the repeatability of the TSD has not been fully validated because of device-related errors. Since TSD measurements and FWD measurements are broadly similar, periodic validation of TSDs by FWDs is recommended for quality control. TSDs provide valuable information about pavement structural conditions that are not reliably or adequately reflected in the current PMS (which focuses mainly on pavement functional conditions). DBPs are a simple and fast method for making initial estimates of pavement structural conditions without the need for layer thickness. In the proposed DBP system, the surface curvature index (SCI_12) and D60 (TSD deflection at 60 in. before the load center) represent the structural strength of the asphalt layer and subgrade, respectively. The combination of pavement functional conditions and TSD-measured structural conditions (PMS+DBPs) may help to make more accurate predictions of pavement performance and to make more appropriate decisions on maintenance and rehabilitation strategies.