23 January 2019 in IEEE Transactions on Antennas and Propagation
An X-band vertical array system is developed for measuring and characterizing electromagnetic (EM) propagation in the marine atmospheric boundary layer. In particular, the evaporation duct that commonly forms over water is investigated as part of the CASPER (Coupled Air-Sea Processes and Electromagnetic ducting Research) at-sea experimental campaign conducted off the coast of Duck, NC, during October-November of 2015. Monte Carlo simulations are first used to develop an optimal array of four vertically spaced receiving antennas. In the experiment, the antennas are mounted on the stern A-frame of a research vessel and measure EM signals transmitted from beacons mounted on another research vessel and on the pier at the Army Field Research Facility. While the propagation loss vs. range provides a dataset similar to previous work, the vertical array can provide sampling of modes in the leaky waveguide formed in the duct. Combining both range and height sampling results in a robust inversion method for evaporation duct estimation. In this paper the efficacy of the 4-element array is demonstrated by estimation of the evaporation duct height through comparison with a library of precomputed propagation curves generated using the parabolic wave equation. Low model error gives confidence in the estimates, which are consistent with concurrent environmental measurements performed by the CASPER team. It is found that the evaporation duct can vary significantly with range and time over the duration of a data collection run.
4 September 2019 in IEEE Antennas and Wireless Propagation Letters
A novel fast back-projection (FBP) approach is presented as a more robust alternative to conventional diffraction tomography (DT) for near-field 3-D microwave imaging. Like DT, the FBP algorithm utilizes the spectral Green's function and stationary phase solution in the forward model, enabling the implementation of the fast Fourier transform to achieve real-time image generation with the same efficiency as DT. However, if the Green's function or the antenna gain pattern has any nulls within the imaging volume, DT can have singularities that give rise to unbalanced images. FBP not only naturally avoids the singularity problem and obtains balanced images through the point spread function, but is also much less sensitive to noise due to the matched-filter property of back-projection. 3-D simulations and measurement of a monostatic near-field free space imaging scenario are presented to demonstrate the efficiency of the proposed FBP method in comparison with DT, and the improved uniformity and noise resistance of the image.